AddToScheme adds the types in this group-version to the given scheme.

GroupVersion is the API Group Version used to register the objects.

SchemeBuilder is used to add go types to the GroupVersionKind scheme.

The minimum and maximum number of accelerators (GPUs, FPGAs, or Amazon Web Services Inferentia chips) on an instance.

The minimum and maximum number of accelerators (GPUs, FPGAs, or Amazon Web Services Inferentia chips) on an instance.

The minimum and maximum amount of total accelerator memory, in MiB.

The minimum and maximum amount of total accelerator memory, in MiB.

Describes a finding for a Network Access Scope.

Describes an account attribute.

Describes a value of an account attribute.

Describes a running instance in a Spot Fleet.

Add an operating Region to an IPAM.

Describes an additional detail for a path analysis.

An entry for a prefix list.

Describes an Elastic IP address, or a carrier IP address.

The attributes associated with an Elastic IP address.

Describes a principal.

Describes an potential intermediate component of a feasible path.

Describes a network access control (ACL) rule.

Describes a path component.

Describes a load balancer target.

Describes a header.

Describes a route table route.

Describes a security group rule.

Describes the private IP addresses assigned to a network interface.

Information about the associated IAM roles.

Describes a target network that is associated with a Client VPN endpoint.

Describes the state of a target network association.

Describes integration options for Amazon Athena.

Describes a value for a resource attribute that is a Boolean value.

Describes a value for a resource attribute that is a String.

Information about an authorization rule.

Describes Availability Zones, Local Zones, and Wavelength Zones.

Describes a message about an Availability Zone, Local Zone, or Wavelength Zone.

The capacity information for instances that can be launched onto the Dedicated Host.

The minimum and maximum baseline bandwidth to Amazon EBS, in Mbps.

The minimum and maximum baseline bandwidth to Amazon EBS, in Mbps.

Describes a block device mapping, which defines the EBS volumes and instance store volumes to attach to an instance at launch.

Describes a bundle task.

Describes an error for BundleInstance.

Information about an address range that is provisioned for use with your Amazon Web Services resources through bring your own IP addresses (BYOIP).

Describes a request to cancel a Spot Instance.

Describes a Spot Fleet error.

Describes a Spot Fleet request that was not successfully canceled.

Describes a Spot Fleet request that was successfully canceled.

Describes a Capacity Reservation.

Information about a Capacity Reservation Fleet.

Describes a resource group to which a Capacity Reservation has been added.

Describes an instance's Capacity Reservation targeting option.

Describes the instance's Capacity Reservation targeting preferences.

Describes a target Capacity Reservation or Capacity Reservation group.

Describes a target Capacity Reservation or Capacity Reservation group.

Describes a carrier gateway.

Information about the client certificate used for authentication.

Information about the client certificate to be used for authentication.

Provides authorization for Amazon to bring a specific IP address range to a specific Amazon Web Services account using bring your own IP addresses (BYOIP).

Describes an IPv4 CIDR block.

Describes the ClassicLink DNS support status of a VPC.

We are retiring EC2-Classic on August 15, 2022.

Describes a Classic Load Balancer.

Describes the state of a client certificate revocation list.

The options for managing connection authorization for new client connections.

The options for managing connection authorization for new client connections.

Describes the client-specific data.

Options for enabling a customizable text banner that will be displayed on Amazon Web Services provided clients when a VPN session is established.

Current state of options for customizable text banner that will be displayed on Amazon Web Services provided clients when a VPN session is established.

Describes the state of an authorization rule.

Describes a client connection.

Describes the status of a client connection.

Describes a Client VPN endpoint.

Describes the status of the Client VPN endpoint attribute.

Describes the state of a Client VPN endpoint.

Information about a Client VPN endpoint route.

Describes the state of a Client VPN endpoint route.

Options for sending VPN tunnel logs to CloudWatch.

Options for sending VPN tunnel logs to CloudWatch.

Describes address usage for a customer-owned address pool.

Describes a customer-owned address pool.

Describes the client connection logging options for the Client VPN endpoint.

Information about the client connection logging options for a Client VPN endpoint.

Describes a connection notification for a VPC endpoint or VPC endpoint service.

Describes a conversion task.

The CPU options for the instance.

The CPU options for the instance.

Describes the instances that could not be launched by the fleet.

Describes the instances that were launched by the fleet.

Describes the options for a VPC attachment.

Describes the user or group to be added or removed from the list of create volume permissions for a volume.

Describes the credit option for CPU usage of a T instance.

The credit option for CPU usage of a T instance.

Describes a customer gateway.

Describes an EC2 Fleet error.

Describes a launch template version that could not be deleted.

Describes a launch template version that was successfully deleted.

Describes the error for a Reserved Instance whose queued purchase could not be deleted.

Information about the tag keys to deregister for the current Region.

Describe details about a fast-launch enabled Windows image that meets the requested criteria.

Describes fast snapshot restores for a snapshot.

Describes the instances that could not be launched by the fleet.

Describes the instances that were launched by the fleet.

Describes the destination options for a flow log.

Describes the destination options for a flow log.

Describes a DHCP configuration option.

DHCPOptions is the Schema for the DHCPOptions API +kubebuilder:object:root=true +kubebuilder:subresource:status +kubebuilder:printcolumn:name="ID",type=string,priority=0,JSONPath=`.status.dhcpOptionsID`.

Describes a set of DHCP options.

DHCPOptionsList contains a list of DHCPOptions +kubebuilder:object:root=true.

DhcpOptionsSpec defines the desired state of DhcpOptions.

DHCPOptionsStatus defines the observed state of DHCPOptions.

Describes an Active Directory.

Describes the Active Directory to be used for client authentication.

Contains information about the errors that occurred when disabling fast snapshot restores.

Describes an error that occurred when disabling fast snapshot restores.

Contains information about an error that occurred when disabling fast snapshot restores.

Describes fast snapshot restores that were successfully disabled.

Describes a disk image.

Describes a disk image.

Describes a disk image.

Describes a disk image volume.

Describes a DNS entry.

Describes the DNS options for an endpoint.

Describes the DNS options for an endpoint.

Information about the DNS server to be used.

Describes a block device for an EBS volume.

Describes a parameter used to set up an EBS volume in a block device mapping.

Describes information used to set up an EBS volume specified in a block device mapping.

Describes an egress-only internet gateway.

Describes the association between an instance and an Elastic Graphics accelerator.

Describes an Elastic Graphics accelerator.

A specification for an Elastic Graphics accelerator.

Describes an elastic GPU.

Describes an elastic inference accelerator.

Describes the association between an instance and an elastic inference accelerator.

ElasticIPAddress is the Schema for the ElasticIPAddresses API +kubebuilder:object:root=true +kubebuilder:subresource:status +kubebuilder:printcolumn:name="ALLOCATION-ID",type=string,priority=0,JSONPath=`.status.allocationID` +kubebuilder:printcolumn:name="PUBLIC-IP",type=string,priority=0,JSONPath=`.status.publicIP`.

ElasticIPAddressList contains a list of ElasticIPAddress +kubebuilder:object:root=true.

ElasticIPAddressSpec defines the desired state of ElasticIPAddress.

ElasticIPAddressStatus defines the observed state of ElasticIPAddress.

Contains information about the errors that occurred when enabling fast snapshot restores.

Describes an error that occurred when enabling fast snapshot restores.

Contains information about an error that occurred when enabling fast snapshot restores.

Describes fast snapshot restores that were successfully enabled.

Indicates whether the instance is enabled for Amazon Web Services Nitro Enclaves.

Indicates whether the instance is enabled for Amazon Web Services Nitro Enclaves.

Describes an EC2 Fleet or Spot Fleet event.

Describes an explanation code for an unreachable path.

Describes an export image task.

Describes an export instance task.

Describes the destination for an export image task.

Describes the destination for an export image task.

Describes the format and location for the export task.

Describes an export instance task.

Describes a Reserved Instance whose queued purchase was not deleted.

Request to create a launch template for a fast-launch enabled Windows AMI.

Identifies the launch template to use for faster launching of the Windows AMI.

Configuration settings for creating and managing pre-provisioned snapshots for a fast-launch enabled Windows AMI.

Configuration settings for creating and managing pre-provisioned snapshots for a fast-launch enabled Windows AMI.

Describes the IAM SAML identity providers used for federated authentication.

The IAM SAML identity provider used for federated authentication.

A filter name and value pair that is used to return a more specific list of results from a describe operation.

Information about a Capacity Reservation in a Capacity Reservation Fleet.

Describes an EC2 Fleet.

Describes overrides for a launch template.

Describes overrides for a launch template.

The Amazon EC2 launch template that can be used by a Spot Fleet to configure Amazon EC2 instances.

The Amazon EC2 launch template that can be used by an EC2 Fleet to configure Amazon EC2 instances.

The strategy to use when Amazon EC2 emits a signal that your Spot Instance is at an elevated risk of being interrupted.

The Spot Instance replacement strategy to use when Amazon EC2 emits a rebalance notification signal that your Spot Instance is at an elevated risk of being interrupted.

FlowLog is the Schema for the FlowLogs API +kubebuilder:object:root=true +kubebuilder:subresource:status.

Describes a flow log.

FlowLogList contains a list of FlowLog +kubebuilder:object:root=true.

FlowLogSpec defines the desired state of FlowLog.

FlowLogStatus defines the observed state of FlowLog.

Describes an Amazon FPGA image (AFI).

Describes an Amazon FPGA image (AFI) attribute.

Describes the state of the bitstream generation process for an Amazon FPGA image (AFI).

Describes a security group.

Indicates whether your instance is configured for hibernation.

Indicates whether your instance is configured for hibernation.

Describes an event in the history of the Spot Fleet request.

Describes an event in the history of an EC2 Fleet.

Describes the properties of the Dedicated Host.

Describes an instance running on a Dedicated Host.

Details about the Dedicated Host Reservation offering.

Describes the properties of a Dedicated Host.

Details about the Dedicated Host Reservation and associated Dedicated Hosts.

Describes an IAM instance profile.

Describes an association between an IAM instance profile and an instance.

Describes an IAM instance profile.

Describes the ICMP type and code.

Describes the ID format for a resource.

The internet key exchange (IKE) version permitted for the VPN tunnel.

The IKE version that is permitted for the VPN tunnel.

Describes an image.

Describes the disk container object for an import image task.

Information about an AMI that is currently in the Recycle Bin.

The request information of license configurations.

The response information for license configurations.

Describes an import image task.

Describes the launch specification for VM import.

Describes an import instance task.

Describes an import volume task.

Describes an import snapshot task.

Describes an import volume task.

Instance is the Schema for the Instances API +kubebuilder:object:root=true +kubebuilder:subresource:status +kubebuilder:printcolumn:name="ID",type=string,priority=0,JSONPath=`.status.instanceID`.

Describes an instance.

Describes a block device mapping.

Describes a block device mapping entry.

Information about the number of instances that can be launched onto the Dedicated Host.

Describes a Reserved Instance listing state.

Describes the credit option for CPU usage of a burstable performance instance.

Describes the credit option for CPU usage of a burstable performance instance.

The event window.

One or more targets associated with the specified event window.

One or more targets associated with the event window.

The targets to disassociate from the specified event window.

Describes an instance to export.

Describes the default credit option for CPU usage of a burstable performance instance family.

Information about an IPv4 prefix.

Describes an IPv6 address.

Describes an IPv6 address.

Information about an IPv6 prefix.

InstanceList contains a list of Instance +kubebuilder:object:root=true.

The maintenance options for the instance.

The maintenance options for the instance.

Describes the market (purchasing) option for the instances.

The metadata options for the instance.

The metadata options for the instance.

Describes the monitoring of an instance.

Describes a network interface.

Describes association information for an Elastic IP address (IPv4).

Describes a network interface attachment.

Describes a network interface.

Describes a private IPv4 address.

The attributes for the instance types.

The attributes for the instance types.

InstanceSpec defines the desired state of Instance.

The instance details to specify which volumes should be snapshotted.

Describes the current state of an instance.

Describes an instance state change.

InstanceStatus defines the observed state of Instance.

Describes the status of an instance.

Describes the instance status.

Describes a scheduled event for an instance.

Describes the registered tag keys for the current Region.

Describes the instance type.

The list of instance types with the specified instance attributes.

The instance types offered.

Information about the Capacity Reservation usage.

InternetGateway is the Schema for the InternetGateways API +kubebuilder:object:root=true +kubebuilder:subresource:status +kubebuilder:printcolumn:name="ID",type=string,priority=0,JSONPath=`.status.internetGatewayID`.

Describes an internet gateway.

Describes the attachment of a VPC to an internet gateway or an egress-only internet gateway.

InternetGatewayList contains a list of InternetGateway +kubebuilder:object:root=true.

InternetGatewaySpec defines the desired state of InternetGateway.

InternetGatewayStatus defines the observed state of InternetGateway.

IPAM is a VPC feature that you can use to automate your IP address management workflows including assigning, tracking, troubleshooting, and auditing IP addresses across Amazon Web Services Regions and accounts throughout your Amazon Web Services Organization.

The historical record of a CIDR within an IPAM scope.

A signed document that proves that you are authorized to bring the specified IP address range to Amazon using BYOIP.

The operating Regions for an IPAM.

In IPAM, a pool is a collection of contiguous IP addresses CIDRs.

In IPAM, an allocation is a CIDR assignment from an IPAM pool to another resource or IPAM pool.

A CIDR provisioned to an IPAM pool.

Details related to why an IPAM pool CIDR failed to be provisioned.

The CIDR for an IPAM resource.

The key/value combination of a tag assigned to the resource.

In IPAM, a scope is the highest-level container within IPAM.

Describes a set of permissions for a security group rule.

Describes an IPv4 range.

Describes an IPv4 prefix.

Describes the IPv4 prefix option for a network interface.

Information about the IPv4 delegated prefixes assigned to a network interface.

Describes an IPv6 CIDR block association.

Describes an IPv6 CIDR block.

Describes an IPv6 address pool.

Describes the IPv6 prefix.

Describes the IPv4 prefix option for a network interface.

Information about the IPv6 delegated prefixes assigned to a network interface.

[EC2-VPC only] Describes an IPv6 range.

Describes a key pair.

The last error that occurred for a VPC endpoint.

Describes a launch permission.

Describes the launch specification for an instance.

Describes a launch template.

Describes a block device mapping.

Describes a block device mapping.

Describes an instance's Capacity Reservation targeting option.

Information about the Capacity Reservation targeting option.

The CPU options for the instance.

The CPU options for the instance.

Describes a block device for an EBS volume.

The parameters for a block device for an EBS volume.

Describes an elastic inference accelerator.

Describes an elastic inference accelerator.

Indicates whether the instance is enabled for Amazon Web Services Nitro Enclaves.

Indicates whether the instance is enabled for Amazon Web Services Nitro Enclaves.

Indicates whether an instance is configured for hibernation.

Indicates whether the instance is configured for hibernation.

Describes an IAM instance profile.

An IAM instance profile.

The market (purchasing) option for the instances.

The market (purchasing) option for the instances.

The metadata options for the instance.

The metadata options for the instance.

Describes a network interface.

The parameters for a network interface.

Describes a license configuration.

Describes a license configuration.

Describes overrides for a launch template.

Describes the placement of an instance.

Describes the placement of an instance.

Describes the options for instance hostnames.

Describes the options for instance hostnames.

Describes the monitoring for the instance.

Describes the monitoring for the instance.

The launch template to use.

The options for Spot Instances.

The options for Spot Instances.

The tags specification for the launch template.

The tags specification for the resources that are created during instance launch.

Describes a launch template version.

Describes a license configuration.

Describes a license configuration.

Describes a load permission.

Describes a load permission.

Describes a local gateway.

Describes a route for a local gateway route table.

Describes a local gateway route table.

Describes an association between a local gateway route table and a virtual interface group.

Describes an association between a local gateway route table and a VPC.

Describes a local gateway virtual interface.

Describes a local gateway virtual interface group.

Describes a managed prefix list.

The minimum and maximum amount of memory, in MiB.

The minimum and maximum amount of memory, in MiB.

The transit gateway options.

Describes the options for a VPC attachment.

The Amazon Web Services Site-to-Site VPN tunnel options to modify.

Describes the monitoring of an instance.

Describes the status of a moving Elastic IP address.

NATGateway is the Schema for the NATGateways API +kubebuilder:object:root=true +kubebuilder:subresource:status +kubebuilder:printcolumn:name="ID",type=string,priority=0,JSONPath=`.status.natGatewayID` +kubebuilder:printcolumn:name="state",type=string,priority=0,JSONPath=`.status.state`.

Describes a NAT gateway.

Describes the IP addresses and network interface associated with a NAT gateway.

NATGatewayList contains a list of NATGateway +kubebuilder:object:root=true.

NatGatewaySpec defines the desired state of NatGateway.

NATGatewayStatus defines the observed state of NATGateway.

NetworkACL is the Schema for the NetworkACLS API +kubebuilder:object:root=true +kubebuilder:subresource:status +kubebuilder:printcolumn:name="ID",type=string,priority=0,JSONPath=`.status.id`.

Describes a network ACL.

Describes an association between a network ACL and a subnet.

Describes an entry in a network ACL.

NetworkACLList contains a list of NetworkACL +kubebuilder:object:root=true.

NetworkAclSpec defines the desired state of NetworkAcl.

NetworkACLStatus defines the observed state of NetworkACL.

Describes a Network Access Scope.

Describes a Network Access Scope analysis.

Describes a network insights analysis.

Describes a path.

Describes a network interface.

Describes association information for an Elastic IP address (IPv4 only), or a Carrier IP address (for a network interface which resides in a subnet in a Wavelength Zone).

Describes a network interface attachment.

Describes an attachment change.

The minimum and maximum number of network interfaces.

The minimum and maximum number of network interfaces.

Describes an IPv6 address associated with a network interface.

Describes a permission for a network interface.

Describes the state of a network interface permission.

Describes the private IPv4 address of a network interface.

Describes the configuration of On-Demand Instances in an EC2 Fleet.

Describes the configuration of On-Demand Instances in an EC2 Fleet.

Describes a packet header statement.

Describes a packet header statement.

Describes a path component.

Describes the data that identifies an Amazon FPGA image (AFI) on the PCI bus.

The status of the transit gateway peering attachment.

We are retiring EC2-Classic on August 15, 2022.

We are retiring EC2-Classic on August 15, 2022.

Information about the transit gateway in the peering attachment.

The Diffie-Hellmann group number for phase 1 IKE negotiations.

Specifies a Diffie-Hellman group number for the VPN tunnel for phase 1 IKE negotiations.

The encryption algorithm for phase 1 IKE negotiations.

Specifies the encryption algorithm for the VPN tunnel for phase 1 IKE negotiations.

The integrity algorithm for phase 1 IKE negotiations.

Specifies the integrity algorithm for the VPN tunnel for phase 1 IKE negotiations.

The Diffie-Hellmann group number for phase 2 IKE negotiations.

Specifies a Diffie-Hellman group number for the VPN tunnel for phase 2 IKE negotiations.

The encryption algorithm for phase 2 IKE negotiations.

Specifies the encryption algorithm for the VPN tunnel for phase 2 IKE negotiations.

The integrity algorithm for phase 2 IKE negotiations.

Specifies the integrity algorithm for the VPN tunnel for phase 2 IKE negotiations.

Describes the placement of an instance.

Describes a placement group.

Describes the placement of an instance.

Describes a CIDR block for an address pool.

Describes a range of ports.

Describes prefixes for Amazon Web Services services.

Describes the resource with which a prefix list is associated.

Describes a prefix list entry.

Describes a prefix list ID.

Describes the price for a Reserved Instance.

Describes the price for a Reserved Instance.

Describes a Reserved Instance offering.

PrincipalIdFormat description.

Information about the Private DNS name for interface endpoints.

Information about the private DNS name for the service endpoint.

Describes the options for instance hostnames.

Describes the options for instance hostnames.

Describes the options for instance hostnames.

Describes a secondary private IPv4 address for a network interface.

Describes a product code.

Describes a virtual private gateway propagating route.

Reserved.

The status of an updated pointer (PTR) record for an Elastic IP address.

Describes an IPv4 address pool.

Describes an address range of an IPv4 address pool.

Describes the result of the purchase.

Describes a request to purchase Scheduled Instances.

Describes the security group that is referenced in the security group rule.

Describes a Region.

Information about the tag keys to register for the current Region.

Remove an operating Region from an IPAM.

An entry for a prefix list.

Information about a root volume replacement task.

A tag on an IPAM resource.

The information to include in the launch template.

Describes the launch specification for an instance.

Describes a launch request for one or more instances, and includes owner, requester, and security group information that applies to all instances in the launch request.

Information about an instance type to use in a Capacity Reservation Fleet.

The cost associated with the Reserved Instance.

The total value of the Convertible Reserved Instance.

Describes a Reserved Instance.

Describes the configuration settings for the modified Reserved Instances.

Describes the ID of a Reserved Instance.

Describes a Reserved Instance listing.

Describes a Reserved Instance modification.

Describes the modification request/s.

Describes a Reserved Instance offering.

Describes a resource statement.

Describes a resource statement.

Describes the error that's returned when you cannot delete a launch template version.

The information for a launch template.

Describes a route in a route table.

RouteTable is the Schema for the RouteTables API +kubebuilder:object:root=true +kubebuilder:subresource:status +kubebuilder:printcolumn:name="ID",type=string,priority=0,JSONPath=`.status.routeTableID`.

Describes a route table.

Describes an association between a route table and a subnet or gateway.

Describes the state of an association between a route table and a subnet or gateway.

RouteTableList contains a list of RouteTable +kubebuilder:object:root=true.

RouteTableSpec defines the desired state of RouteTable.

RouteTableStatus defines the observed state of RouteTable.

Describes the monitoring of an instance.

The tags to apply to the AMI object that will be stored in the Amazon S3 bucket.

Describes the storage parameters for Amazon S3 and Amazon S3 buckets for an instance store-backed AMI.

Describes a Scheduled Instance.

Describes a schedule that is available for your Scheduled Instances.

Describes the recurring schedule for a Scheduled Instance.

Describes the recurring schedule for a Scheduled Instance.

Describes a block device mapping for a Scheduled Instance.

Describes an EBS volume for a Scheduled Instance.

Describes an IAM instance profile for a Scheduled Instance.

Describes the launch specification for a Scheduled Instance.

Describes whether monitoring is enabled for a Scheduled Instance.

Describes a network interface for a Scheduled Instance.

Describes the placement for a Scheduled Instance.

Describes a private IPv4 address for a Scheduled Instance.

SecurityGroup is the Schema for the SecurityGroups API +kubebuilder:object:root=true +kubebuilder:subresource:status +kubebuilder:printcolumn:name="ID",type=string,priority=0,JSONPath=`.status.id`.

Describes a security group.

Describes a security group.

SecurityGroupList contains a list of SecurityGroup +kubebuilder:object:root=true.

Describes a VPC with a security group that references your security group.

Describes a security group rule.

Describes the description of a security group rule.

Describes a security group rule.

Describes an update to a security group rule.

SecurityGroupSpec defines the desired state of SecurityGroup.

SecurityGroupStatus defines the observed state of SecurityGroup.

Describes a service configuration for a VPC endpoint service.

Describes a VPC endpoint service.

Describes the type of service for a VPC endpoint.

Describes the time period for a Scheduled Instance to start its first schedule.

Describes the time period for a Scheduled Instance to start its first schedule.

Describes the snapshot created from the imported disk.

The disk container object for the import snapshot request.

Information about a snapshot.

Information about a snapshot that is currently in the Recycle Bin.

Details about the import snapshot task.

Provides information about a snapshot's storage tier.

The Spot Instance replacement strategy to use when Amazon EC2 emits a signal that your Spot Instance is at an elevated risk of being interrupted.

Describes the data feed for a Spot Instance.

Describes the launch specification for one or more Spot Instances.

Describes whether monitoring is enabled.

Describes a Spot Fleet request.

Describes the configuration of a Spot Fleet request.

The tags for a Spot Fleet resource.

Describes a Spot Instance request.

Describes a Spot Instance state change.

Describes the status of a Spot Instance request.

The options for Spot Instances.

Describes the configuration of Spot Instances in an EC2 Fleet.