package
0.0.0-20211205205814-168ccc21e67c
Repository: https://github.com/ziutek/emgo.git
Documentation: pkg.go.dev
# Constants
+ ACK response received/transmitted interrupt.
+ ACK response received/transmitted interrupt mask.
+ A-device timeout change.
+ AHB error.
+ AHB error.
+ AHB master idle.
+ Arbiter parking enable.
+ A-peripheral session valid override enable.
+ A-peripheral session valid override value.
+ Back-to-back SETUP packets received mask.
+ Back-to-back SETUP packets received.
+ Babble error.
+ Babble error mask.
+ Battery charging detector (BCD) enable.
+ OUT EP interrupt mask bits.
+ Babble error interrupt.
+ BESL value received with last ACKed LPM Token.
+ BESL threshold.
+ BNA interrupt mask.
+ Buffer not available interrupt.
+ BNA interrupt mask.
+ Global OUT NAK effective.
+ B-session valid.
+ B-peripheral session valid override enable.
+ B-peripheral session valid override value.
+ Clear global IN NAK.
+ Clear global OUT NAK.
+ Channel disable.
+ Channel enable.
+ Channel halted.
+ Channel halted mask.
+ Connector ID status change.
+ Connector ID status change mask.
+ Current mode of operation.
+ Clear NAK.
+ Clear NAK.
+ Do complete split.
+ Core soft reset.
+ Corrupt Tx packet.
+ Device address.
+ Device address.
+ Data fetch suspended.
+ Debounce done.
+ Data contact detection (DCD) mode enable.
+ Data contact detection (DCD) status.
+ Power down.
+ Disconnect detected interrupt.
+ Disconnect detected interrupt mask.
+ DMA address.
+ DMA address.
+ DMA enable.
+ DMA request signal.
+ Do PING.
+ OUT EP interrupt mask bits.
+ Data PID.
+ Device speed.
+ Data toggle error.
+ Data toggle error mask.
+ Device VBUS pulsing time.
+ Erratic error.
+ Enable best effort service latency.
+ Enumeration done.
+ Enumeration done mask.
+ Enumerated speed.
+ Even/odd frame.
+ End of periodic frame interrupt.
+ End of periodic frame interrupt mask.
+ Endpoint direction.
+ Endpoint disable.
+ Endpoint disable.
+ Endpoint disabled interrupt.
+ Endpoint disabled interrupt.
+ Endpoint disabled interrupt mask.
+ Endpoint disabled interrupt mask.
+ Endpoint enable.
+ Endpoint enable.
+ Endpoint mismatch interrupt mask.
+ IN EP interrupt mask bits.
+ Endpoint number.
+ Endpoint type.
+ Endpoint type.
+ Endpoint type.
+ Early suspend.
+ Early suspend mask.
+ Host frame counter reset.
+ Forced peripheral mode.
+ Forced host mode.
+ Frame number of the received SOF.
+ Frame interval.
+ Frame overrun.
+ Frame overrun mask.
+ Frame number.
+ FS/LS PHY clock select.
+ FS- and LS-only support.
+ Data fetch suspended mask.
+ Frame time remaining.
+ Global IN nonperiodic NAK effective.
+ Global nonperiodic IN NAK effective mask.
+ Global IN NAK status.
+ Global interrupt mask.
+ Global OUT NAK effective mask.
+ Global OUT NAK status.
+ Channel interrupt mask.
+ Burst length/type.
+ Host channels interrupt mask.
+ Host channels interrupt.
+ Host negotiation detected.
+ HNP-capable.
+ Host negotiation success status change.
+ Host port interrupt.
+ HCLK soft reset.
+ Hub address.
+ IN endpoint 1interrupt bit.
+ IN endpoint interrupt bits.
+ IN endpoint interrupt.
+ IN endpoints interrupt mask.
+ IN EP interrupt mask bits.
+ Incomplete isochronous IN transfer.
+ Incomplete isochronous IN transfer mask.
+ IN endpoint NAK effective.
+ IN endpoint NAK effective mask.
+ IN token received with EP mismatch mask.
+ IN endpoint TxFIFO space avail.
+ IN endpoint TxFIFO depth.
+ IN EP Tx FIFO empty interrupt mask bits.
+ IN endpoint FIFOx transmit RAM start address.
+ Isochronous OUT packet dropped interrupt.
+ Isochronous OUT packet dropped interrupt mask.
+ ISO IN endpoint threshold enable.
+ IN token received when TxFIFO is empty.
+ IN token received when TxFIFO empty mask.
+ L1 deep sleep enable.
+ Sleep State Resume OK.
+ L1 shallow sleep enable.
+ LPM Token acknowledge enable.
+ LPMCHIDX:.
+ LPM support enable.
+ LPM interrupt.
+ LPM interrupt Mask.
+ LPM mode specified for Mode of Operation.
+ LPM retry count.
+ LPM retry count status.
+ LPM response.
+ Low-speed device.
+ Multi Count (MC) / Error Count (EC).
+ Mode mismatch interrupt.
+ Mode mismatch interrupt mask.
+ Maximum packet size.
+ Maximum packet size.
+ Maximum packet size */ /*!<Bit 1.
+ Packet count.
+ NAK response received interrupt.
+ NAK interrupt.
+ NAK response received interrupt mask.
+ NAK status.
+ NAK status.
+ Nonisochronous IN endpoints threshold enable.
+ Nonperiodic TxFIFO empty.
+ Nonperiodic TxFIFO empty mask.
+ Response received interrupt.
+ response received interrupt mask.
+ NYET interrupt.
+ Nonzero-length status OUT handshake.
+ Odd frame.
+ OUT endpoint 1 interrupt bit.
+ OUT endpoint interrupt bits.
+ OUT endpoint interrupt.
+ OUT endpoints interrupt mask.
+ OUT EP interrupt mask bits.
+ OUT packet error mask.
+ OUT token received when endpoint disabled.
+ OUT token received when endpoint disabled mask.
+ OTG interrupt.
+ OTG interrupt mask.
+ Indicator complement.
+ Primary detection (PD) mode enable.
+ Primary detection (PD) status.
+ Periodic scheduling interval.
+ Periodic (micro)frame interval.
+ PHY Low-power clock select.
+ USB 2.0 high-speed ULPI PHY or USB 1.1 full-speed serial transceiver select.
+ Packet count.
+ Packet count.
+ Packet count.
+ Packet dropped status.
+ OUT EP interrupt mask bits.
+ Power-on programming done.
+ Product ID field.
+ Port address.
+ Host port interrupt mask.
+ DM pull-up detection status.
+ Indicator pass through.
+ Host periodic TxFIFO depth.
+ Periodic TxFIFO empty.
+ Periodic TxFIFO empty level.
+ Periodic TxFIFO empty mask.
+ Periodic transmit data FIFO space available.
+ Periodic transmit request queue space available.
+ Top of the periodic transmit request queue.
+ Host periodic TxFIFO start address.
+ Power down.
+ Incomplete periodic transfer.
+ Incomplete periodic transfer mask.
+ bRemoteWake value received with last ACKed LPM Token.
+ Remote wakeup signaling.
+ RxFIFO depth.
+ RxFIFO flush.
+ RxFIFO nonempty.
+ Receive FIFO nonempty mask.
+ Receive threshold enable.
+ Receive threshold length.
+ Set DATA0 PID.
+ Set DATA0 PID.
+ Secondary detection (SD) mode enable.
+ Secondary detection (SD) status.
+ Soft disconnect.
+ Session end detected.
+ Set global IN NAK.
+ Set global OUT NAK.
+ Port sleep status.
+ Set NAK.
+ Set NAK.
+ Send LPM transaction.
+ Snoop mode.
+ Set odd frame.
+ Set odd frame.
+ Start of frame.
+ Start of frame mask.
+ Split enable.
+ SRP-capable.
+ Session request.
+ Session request/new session detected interrupt mask.
+ Session request/new session detected interrupt.
+ Session request success.
+ Session request success status change.
+ STALL response received interrupt.
+ STALL handshake.
+ STALL handshake.
+ STALL response received interrupt mask.
+ SETUP phase done.
+ SETUP packet count.
+ SETUP phase done mask.
+ Suspend status.
+ Test control.
+ Timeout condition.
+ FS timeout calibration.
+ Timeout condition mask (nonisochronous endpoints).
+ USB turnaround time.
+ TermSel DLine pulsing selection.
+ Transaction error.
+ Transaction error mask.
+ Transmit FIFO empty.
+ TxFIFO empty level.
+ TxFIFO flush.
+ Transmit Fifo Underrun.
+ TxFIFO number.
+ TxFIFO number.
+ FIFO underrun mask.
+ Transmit threshold length.
+ ULPI Auto-resume.
+ ULPI Clock SuspendM.
+ ULPI External VBUS Drive.
+ ULPI external VBUS indicator.
+ ULPI FS/LS select.
+ ULPI interface protect disable.
+ USB active endpoint.
+ USB active endpoint.
+ USB reset.
+ USB reset mask.
+ USB suspend.
+ USB suspend mask.
+ Secondary detection (SD) mode enable.
+ Device VBUS discharge time.
+ VBUS valid override enable.
+ VBUS valid override value.
+ Resume/remote wakeup detected interrupt.
+ Resume/remote wakeup detected interrupt mask.
+ XACTPOS.
+ Transfer completed.
+ Transfer completed interrupt.
+ Transfer completed interrupt.
+ Transfer completed interrupt mask.
+ Transfer completed interrupt mask.
+ Transfer completed mask.
+ Transfer size.
+ Transfer size.
+ Transfer size.