package
0.0.0-20211205205814-168ccc21e67c
Repository: https://github.com/ziutek/emgo.git
Documentation: pkg.go.dev
# Constants
+ ACCMOD[1:0] bits (Access mode).
Bit 0.
Bit 1.
+ ADDHLD[3:0] bits (Address-hold phase duration).
Bit 0.
Bit 1.
Bit 2.
Bit 3.
+ ADDSET[3:0] bits (Address setup phase duration).
Bit 0.
Bit 1.
Bit 2.
Bit 3.
+ Asynchronous wait.
+ Burst enable bit.
+ BUSTURN[3:0] bits (Bus turnaround phase duration).
Bit 0.
Bit 1.
Bit 2.
Bit 3.
+ Write burst enable.
+ CLKDIV[3:0] bits (Clock divide ratio).
Bit 0.
Bit 1.
Bit 2.
Bit 3.
+ DATAST [3:0] bits (Data-phase duration).
Bit 0.
Bit 1.
Bit 2.
Bit 3.
+ DATLA[3:0] bits (Data latency).
Bit 0.
Bit 1.
Bit 2.
Bit 3.
+ ACCMOD[1:0] bits (Access mode).
Bit 0.
Bit 1.
+ ADDHLD[3:0] bits (Address-hold phase duration).
Bit 0.
Bit 1.
Bit 2.
Bit 3.
+ ADDSET[3:0] bits (Address setup phase duration).
Bit 0.
Bit 1.
Bit 2.
Bit 3.
+ CLKDIV[3:0] bits (Clock divide ratio).
Bit 0.
Bit 1.
Bit 2.
Bit 3.
+ DATAST [3:0] bits (Data-phase duration).
Bit 0.
Bit 1.
Bit 2.
Bit 3.
+ DATLA[3:0] bits (Data latency).
Bit 0.
Bit 1.
Bit 2.
Bit 3.
+ Extended mode enable.
+ Flash access enable.
+ Memory bank enable bit.
+ MTYP[1:0] bits (Memory type).
Bit 0.
Bit 1.
+ Address/data multiplexing enable bit.
+ MWID[1:0] bits (Memory data bus width).
Bit 0.
Bit 1.
+ Wait timing configuration.
+ Wait enable bit.
+ Wait signal polarity bit.
+ Wrapped burst mode support.
+ Write enable bit.