package
0.0.0-20211205205814-168ccc21e67c
Repository: https://github.com/ziutek/emgo.git
Documentation: pkg.go.dev
# Constants
+ Channel Status bit.
+ Control Buffer DMA ENable for control flow.
+ Channel Selection.
+ Channel A status information.
+ The Control Buffer register is not empty.
+ Control Buffer Ready Interrupt Enable.
+ Mask of channel status and user bits.
+ Data value.
+ RX Data format.
Data value Channel B.
Data value Channel A.
+ Framing error.
+ Serial Interface Error Interrupt Enable.
+ SPDIF input selection.
+ Maximum allowed re-tries during synchronization phase.
+ Overrun error.
+ Clears the Overrun error flag.
+ Overrun error Interrupt Enable.
+ Parity Error bit.
+ Parity error.
+ Clears the Parity error flag.
+ Parity error interrupt enable.
+ Mask Parity error bit.
+ Preamble Type.
+ Mask of Preamble Type bits.
+ Receiver DMA Enable for data flow.
+ Read data register not empty.
+ RXNE interrupt enable.
+ Stereo Mode.
+ Synchronization Block Detected.
+ Clears the Synchronization Block Detected flag.
+ Synchronization Block Detected Interrupt Enable.
+ Synchronization error.
+ Start Of Block.
+ Peripheral Block Enable.
+ Synchronization Done.
+ Clears the Synchronization Done flag.
+ Synchronization Done.
+ Time-out error.
+ Threshold LOW.
+ Threshold HIGH.
+ User bit.
+ User data information.
+ Validity bit.
+ Mask of Validity bit.
+ Wait For Activity.
+ Duration of 5 symbols counted with spdif_clk.
# Variables
emgo:const.