package
0.0.0-20211205205814-168ccc21e67c
Repository: https://github.com/ziutek/emgo.git
Documentation: pkg.go.dev
# Constants
+ Address of the USART node.
+ Clock Enable.
+ Clock Phase.
+ Clock Polarity.
+ CTS Flag.
+ CTS Enable.
+ CTS Interrupt Enable.
+ Fraction of USARTDIV.
+ Mantissa of USARTDIV.
+ DMA Enable Receiver.
+ DMA Enable Transmitter.
+ Error Interrupt Enable.
+ Framing Error.
+ Guard time value.
+ Half-Duplex Selection.
+ IDLE line detected.
+ IDLE Interrupt Enable.
+ IrDA mode Enable.
+ IrDA Low-Power.
+ Last Bit Clock pulse.
+ LIN Break Detection Flag.
+ LIN Break Detection Interrupt Enable.
+ LIN Break Detection Length.
+ LIN mode enable.
+ Word length.
+ Smartcard NACK enable.
+ Noise Error Flag.
+ USART One bit method enable.
+ OverRun Error.
+ USART Oversampling by 8 enable.
+ Parity Control Enable.
+ Parity Error.
+ PE Interrupt Enable.
+ Parity Selection.
+ PSC[7:0] bits (Prescaler value).
+ Receiver Enable.
+ RTS Enable.
+ Receiver wakeup.
+ Read Data Register Not Empty.
+ RXNE Interrupt Enable.
+ Send Break.
+ Smartcard mode enable.
+ STOP[1:0] bits (STOP bits).
+ Transmission Complete.
+ Transmission Complete Interrupt Enable.
+ Transmitter Enable.
+ Transmit Data Register Empty.
+ TXE Interrupt Enable.
+ USART Enable.
+ Wakeup method.