package
0.0.0-20211205205814-168ccc21e67c
Repository: https://github.com/ziutek/emgo.git
Documentation: pkg.go.dev
# Constants
+ Bidirectional data mode enable.
+ Output enable in bidirectional mode.
+ BR[2:0] bits (Baud Rate Control).
+ Busy flag.
+ Channel length (number of bits per audio channel).
+ Channel side.
+ steady state clock polarity.
+ Clock Phase.
+ Clock Polarity.
+ Hardware CRC calculation enable.
+ CRC Error flag.
+ CRC Length.
+ Transmit CRC next.
+ CRC polynomial register.
+ DATLEN[1:0] bits (Data length to be transferred).
+ DS[3:0] Data Size.
+ Error Interrupt Enable.
+ TI frame format error.
+ Frame Format Enable.
+ FIFO Reception Level.
+ FIFO reception Threshold.
+ FIFO Transmission Level.
+ I2SCFG[1:0] bits (I2S configuration mode).
+ I2S Linear prescaler.
+ I2S Enable.
+ I2S mode selection.
+ I2SSTD[1:0] bits (I2S standard selection).
+ Last DMA transfer for reception.
+ Last DMA transfer for transmission.
+ Frame Format.
+ Master Clock Output Enable.
+ Mode fault.
+ Master Selection.
+ NSS pulse management Enable.
+ Odd factor for the prescaler.
+ Overrun flag.
+ PCM frame synchronization.
+ Rx CRC Register.
+ Rx Buffer DMA Enable.
+ Receive buffer Not Empty.
+ RX buffer Not Empty Interrupt Enable.
+ Receive only.
+ SPI Enable.
+ Internal slave select.
+ Software slave management.
+ SS Output Enable.
+ Tx CRC Register.
+ Tx Buffer DMA Enable.
+ Transmit buffer Empty.
+ Tx buffer Empty Interrupt Enable.
+ Underrun flag.