ApproveCertificateSigningRequestJSON200Response is a constructor method for a ApproveCertificateSigningRequest response.

AttachLaunchJSON101Response is a constructor method for a AttachLaunch response.

CreateDomainJSON200Response is a constructor method for a CreateDomain response.

CreateFeedJSON200Response is a constructor method for a CreateFeed response.

CreateImageJSON200Response is a constructor method for a CreateImage response.

CreateTenantJSON201Response is a constructor method for a CreateTenant response.

CreateUserJSON201Response is a constructor method for a CreateUser response.

DockerConfigListJSON200Response is a constructor method for a DockerConfigList response.

DockerContainerInspectJSON200Response is a constructor method for a DockerContainerInspect response.

DockerContainerListJSON200Response is a constructor method for a DockerContainerList response.

DockerImageInspectJSON200Response is a constructor method for a DockerImageInspect response.

DockerImageListJSON200Response is a constructor method for a DockerImageList response.

DockerNetworkListJSON200Response is a constructor method for a DockerNetworkList response.

DockerNodeListJSON200Response is a constructor method for a DockerNodeList response.

DockerSecretCreateJSON201Response is a constructor method for a DockerSecretCreate response.

DockerSecretListJSON200Response is a constructor method for a DockerSecretList response.

DockerServiceInspectJSON200Response is a constructor method for a DockerServiceInspect response.

DockerServiceListJSON200Response is a constructor method for a DockerServiceList response.

DockerServiceListJSON500Response is a constructor method for a DockerServiceList response.

DockerServiceListJSON503Response is a constructor method for a DockerServiceList response.

DockerSystemInfoJSON200Response is a constructor method for a DockerSystemInfo response.

DockerSystemVersionJSON200Response is a constructor method for a DockerSystemVersion response.

DockerSystemVersionJSON500Response is a constructor method for a DockerSystemVersion response.

DockerVolumeCreateJSON201Response is a constructor method for a DockerVolumeCreate response.

DockerVolumeInspectJSON200Response is a constructor method for a DockerVolumeInspect response.

DockerVolumeListJSON200Response is a constructor method for a DockerVolumeList response.

EditKraudPodJSON200Response is a constructor method for a EditKraudPod response.

EditKraudVolumeJSON200Response is a constructor method for a EditKraudVolume response.

GenerateCertJSON200Response is a constructor method for a GenerateCert response.

GetAPIVersionsJSON200Response is a constructor method for a GetAPIVersions response.

GetAppsV1apiResourcesJSON200Response is a constructor method for a GetAppsV1apiResources response.

GetAuthorizationV1apiResourcesJSON200Response is a constructor method for a GetAuthorizationV1apiResources response.

GetBillingInfoJSON200Response is a constructor method for a GetBillingInfo response.

GetCertificateSigningRequestJSON200Response is a constructor method for a GetCertificateSigningRequest response.

GetCertificatesV1apiResourcesJSON200Response is a constructor method for a GetCertificatesV1apiResources response.

GetCodeVersionJSON200Response is a constructor method for a GetCodeVersion response.

GetConfigMapJSON200Response is a constructor method for a GetConfigMap response.

GetCoreAPIVersionsJSON200Response is a constructor method for a GetCoreAPIVersions response.

GetCoreV1apiResourcesJSON200Response is a constructor method for a GetCoreV1apiResources response.

GetDefaultHTTPBackendJSON200Response is a constructor method for a GetDefaultHTTPBackend response.

GetDefaultHTTPBackendServiceJSON200Response is a constructor method for a GetDefaultHTTPBackendService response.

GetDeploymentJSON200Response is a constructor method for a GetDeployment response.

GetEndpointsJSON200Response is a constructor method for a GetEndpoints response.

GetEventsStreamJSON200Response is a constructor method for a GetEventsStream response.

GetEventsV1apiResourcesJSON200Response is a constructor method for a GetEventsV1apiResources response.

GetFeedAppsJSON200Response is a constructor method for a GetFeedApps response.

GetFeedAppTemplateJSON200Response is a constructor method for a GetFeedAppTemplate response.

GetFeedAppVersionsJSON200Response is a constructor method for a GetFeedAppVersions response.

GetFeedsJSON200Response is a constructor method for a GetFeeds response.

GetIndexJSON200Response is a constructor method for a GetIndex response.

GetIngressClassJSON200Response is a constructor method for a GetIngressClass response.

GetIngressJSON200Response is a constructor method for a GetIngress response.

GetKraudcloudV1apiResourcesJSON200Response is a constructor method for a GetKraudcloudV1apiResources response.

GetNamespaceJSON200Response is a constructor method for a GetNamespace response.

GetNamespaceOverviewByNameJSON200Response is a constructor method for a GetNamespaceOverviewByName response.

GetNetworkingAPIResourcesJSON200Response is a constructor method for a GetNetworkingAPIResources response.

GetNetworkingV1apiResourcesJSON200Response is a constructor method for a GetNetworkingV1apiResources response.

GetNodeJSON200Response is a constructor method for a GetNode response.

GetPersistentVolumeClaimJSON200Response is a constructor method for a GetPersistentVolumeClaim response.

GetPodJSON200Response is a constructor method for a GetPod response.

GetPodLogJSON200Response is a constructor method for a GetPodLog response.

GetSecretJSON200Response is a constructor method for a GetSecret response.

GetServiceAccountJSON200Response is a constructor method for a GetServiceAccount response.

GetServiceJSON200Response is a constructor method for a GetService response.

GetStorageClassJSON200Response is a constructor method for a GetStorageClass response.

GetStorageV1apiResourcesJSON200Response is a constructor method for a GetStorageV1apiResources response.

GetUserJSON200Response is a constructor method for a GetUser response.

GetVmmLaunchSpecJSON200Response is a constructor method for a GetVmmLaunchSpec response.

IdpCreateJSON200Response is a constructor method for a IdpCreate response.

IdpInspectJSON200Response is a constructor method for a IdpInspect response.

IdpListJSON200Response is a constructor method for a IdpList response.

InspectImageJSON200Response is a constructor method for a InspectImage response.

InspectKraudDeploymentJSON200Response is a constructor method for a InspectKraudDeployment response.

InspectKraudPodJSON200Response is a constructor method for a InspectKraudPod response.

InspectKraudVolumeJSON200Response is a constructor method for a InspectKraudVolume response.

InspectKraudVpcJSON200Response is a constructor method for a InspectKraudVpc response.

LaunchAppJSON200Response is a constructor method for a LaunchApp response.

LaunchTemplateJSON200Response is a constructor method for a LaunchTemplate response.

ListCertificateSigningRequestsJSON200Response is a constructor method for a ListCertificateSigningRequests response.

ListConfigMapsJSON200Response is a constructor method for a ListConfigMaps response.

ListDeploymentsJSON200Response is a constructor method for a ListDeployments response.

ListDomainsJSON200Response is a constructor method for a ListDomains response.

ListEndpointsAllNamespacesJSON200Response is a constructor method for a ListEndpointsAllNamespaces response.

ListEndpointsJSON200Response is a constructor method for a ListEndpoints response.

ListImagesJSON200Response is a constructor method for a ListImages response.

ListIngressClassesJSON200Response is a constructor method for a ListIngressClasses response.

ListIngressesJSON200Response is a constructor method for a ListIngresses response.

ListKraudDeploymentsJSON200Response is a constructor method for a ListKraudDeployments response.

ListKraudInflowsJSON200Response is a constructor method for a ListKraudInflows response.

ListKraudIngressesJSON200Response is a constructor method for a ListKraudIngresses response.

ListKraudPodsJSON200Response is a constructor method for a ListKraudPods response.

ListKraudVolumesJSON200Response is a constructor method for a ListKraudVolumes response.

ListKraudVpcOverlaysJSON200Response is a constructor method for a ListKraudVpcOverlays response.

ListKraudVpcsJSON200Response is a constructor method for a ListKraudVpcs response.

ListLayersJSON200Response is a constructor method for a ListLayers response.

ListNamespacesEventsJSON200Response is a constructor method for a ListNamespacesEvents response.

ListNamespacesJSON200Response is a constructor method for a ListNamespaces response.

ListNodesJSON200Response is a constructor method for a ListNodes response.

ListPersistentVolumeClaimsJSON200Response is a constructor method for a ListPersistentVolumeClaims response.

ListPodsAllNamespacesJSON200Response is a constructor method for a ListPodsAllNamespaces response.

ListPodsJSON200Response is a constructor method for a ListPods response.

ListRolesJSON200Response is a constructor method for a ListRoles response.

ListSecretsJSON200Response is a constructor method for a ListSecrets response.

ListServiceAccountsJSON200Response is a constructor method for a ListServiceAccounts response.

ListServicesAllNamespacesJSON200Response is a constructor method for a ListServicesAllNamespaces response.

ListServicesJSON200Response is a constructor method for a ListServices response.

ListStorageClassesJSON200Response is a constructor method for a ListStorageClasses response.

ListTenantsJSON200Response is a constructor method for a ListTenants response.

ListUsersJSON200Response is a constructor method for a ListUsers response.

PatchCertificateSigningRequestJSON200Response is a constructor method for a PatchCertificateSigningRequest response.

PatchConfigMapJSON200Response is a constructor method for a PatchConfigMap response.

PatchDeploymentJSON200Response is a constructor method for a PatchDeployment response.

PatchIngressJSON200Response is a constructor method for a PatchIngress response.

PatchNamespaceJSON200Response is a constructor method for a PatchNamespace response.

PatchPersistentVolumeClaimJSON200Response is a constructor method for a PatchPersistentVolumeClaim response.

PatchPodJSON200Response is a constructor method for a PatchPod response.

PatchSecretJSON200Response is a constructor method for a PatchSecret response.

PatchServiceAccountJSON200Response is a constructor method for a PatchServiceAccount response.

PatchServiceJSON200Response is a constructor method for a PatchService response.

ReplaceSecretJSON200Response is a constructor method for a ReplaceSecret response.

UpdateBillingInfoJSON200Response is a constructor method for a UpdateBillingInfo response.

VmmCradleStateJSON101Response is a constructor method for a VmmCradleState response.

WhoamiJSON200Response is a constructor method for a Whoami response.

Defines values for ContainerStateStatus.

Defines values for ContainerStateStatus.

Defines values for ContainerStateStatus.

Defines values for ContainerStateStatus.

Defines values for ContainerStateStatus.

Defines values for ContainerStateStatus.

Defines values for ContainerStateStatus.

Defines values for EndpointPortConfigProtocol.

Defines values for EndpointPortConfigProtocol.

Defines values for EndpointPortConfigProtocol.

Defines values for EndpointPortConfigPublishMode.

Defines values for EndpointPortConfigPublishMode.

Defines values for EndpointSpecMode.

Defines values for EndpointSpecMode.

Defines values for HealthStatus.

Defines values for HealthStatus.

Defines values for HealthStatus.

Defines values for HealthStatus.

Defines values for HostConfigCgroupnsMode.

Defines values for HostConfigCgroupnsMode.

Defines values for HostConfigIsolation.

Defines values for HostConfigIsolation.

Defines values for HostConfigIsolation.

Defines values for HostConfigLogConfigType.

Defines values for HostConfigLogConfigType.

Defines values for HostConfigLogConfigType.

Defines values for HostConfigLogConfigType.

Defines values for HostConfigLogConfigType.

Defines values for HostConfigLogConfigType.

Defines values for HostConfigLogConfigType.

Defines values for HostConfigLogConfigType.

Defines values for HostConfigLogConfigType.

Defines values for LocalNodeState.

Defines values for LocalNodeState.

Defines values for LocalNodeState.

Defines values for LocalNodeState.

Defines values for LocalNodeState.

Defines values for LocalNodeState.

Defines values for MountBindOptionsPropagation.

Defines values for MountBindOptionsPropagation.

Defines values for MountBindOptionsPropagation.

Defines values for MountBindOptionsPropagation.

Defines values for MountBindOptionsPropagation.

Defines values for MountBindOptionsPropagation.

Defines values for MountPointType.

Defines values for MountPointType.

Defines values for MountPointType.

Defines values for MountPointType.

Defines values for MountType.

Defines values for MountType.

Defines values for MountType.

Defines values for MountType.

Defines values for NodeSpecAvailability.

Defines values for NodeSpecAvailability.

Defines values for NodeSpecAvailability.

Defines values for NodeSpecRole.

Defines values for NodeSpecRole.

Defines values for NodeState.

Defines values for NodeState.

Defines values for NodeState.

Defines values for NodeState.

Defines values for PortType.

Defines values for PortType.

Defines values for PortType.

Defines values for Reachability.

Defines values for Reachability.

Defines values for Reachability.

Defines values for RestartPolicyName.

Defines values for RestartPolicyName.

Defines values for RestartPolicyName.

Defines values for RestartPolicyName.

Defines values for RestartPolicyName.

Defines values for ServiceSpecRollbackConfigFailureAction.

Defines values for ServiceSpecRollbackConfigFailureAction.

Defines values for ServiceSpecRollbackConfigOrder.

Defines values for ServiceSpecRollbackConfigOrder.

Defines values for ServiceSpecUpdateConfigFailureAction.

Defines values for ServiceSpecUpdateConfigFailureAction.

Defines values for ServiceSpecUpdateConfigFailureAction.

Defines values for ServiceSpecUpdateConfigOrder.

Defines values for ServiceSpecUpdateConfigOrder.

Defines values for ServiceUpdateStatusState.

Defines values for ServiceUpdateStatusState.

Defines values for ServiceUpdateStatusState.

Defines values for SwarmSpecCAConfigExternalCAsProtocol.

Defines values for SystemInfoCgroupDriver.

Defines values for SystemInfoCgroupDriver.

Defines values for SystemInfoCgroupDriver.

Defines values for SystemInfoCgroupVersion.

Defines values for SystemInfoCgroupVersion.

Defines values for SystemInfoIsolation.

Defines values for SystemInfoIsolation.

Defines values for SystemInfoIsolation.

Defines values for TaskSpecContainerSpecIsolation.

Defines values for TaskSpecContainerSpecIsolation.

Defines values for TaskSpecContainerSpecIsolation.

Defines values for TaskSpecRestartPolicyCondition.

Defines values for TaskSpecRestartPolicyCondition.

Defines values for TaskSpecRestartPolicyCondition.

Defines values for ContainerStateStatus.

Defines values for EndpointPortConfigProtocol.

Defines values for EndpointPortConfigPublishMode.

Defines values for EndpointSpecMode.

Defines values for HealthStatus.

Defines values for HostConfigCgroupnsMode.

Defines values for HostConfigIsolation.

Defines values for HostConfigLogConfigType.

Defines values for LocalNodeState.

Defines values for MountBindOptionsPropagation.

Defines values for MountPointType.

Defines values for MountType.

Defines values for NodeSpecAvailability.

Defines values for NodeSpecRole.

Defines values for NodeState.

Defines values for PortType.

Defines values for Reachability.

Defines values for RestartPolicyName.

Defines values for ServiceSpecRollbackConfigFailureAction.

Defines values for ServiceSpecRollbackConfigOrder.

Defines values for ServiceSpecUpdateConfigFailureAction.

Defines values for ServiceSpecUpdateConfigOrder.

Defines values for ServiceUpdateStatusState.

Defines values for SwarmSpecCAConfigExternalCAsProtocol.

Defines values for SystemInfoCgroupDriver.

Defines values for SystemInfoCgroupVersion.

Defines values for SystemInfoIsolation.

Defines values for TaskSpecContainerSpecIsolation.

Defines values for TaskSpecRestartPolicyCondition.

Defines values for VolumeScope.

Defines values for VolumeScope.

Defines values for VolumeScope.

Address represents an IPv4 or IPv6 IP address.

AuthConfig defines model for AuthConfig.

AuthorizeSessionParams defines parameters for AuthorizeSession.

BillingAddress defines model for BillingAddress.

BillingAddressWithContracts defines model for BillingAddressWithContracts.

BillingContract defines model for BillingContract.

ClusterInfo represents information about the swarm as is returned by the "/info" endpoint.

CodeVersionInfo defines model for CodeVersionInfo.

Commit holds the Git-commit (SHA1) that a binary was built from, as reported in the version-string of external tools, such as `containerd`, or `runC`.

Config defines model for Config.

ConfigSpec defines model for ConfigSpec.

User-defined key/value metadata.

Configuration for a container that is portable between hosts.

An object mapping ports to an empty object in the form: `{"<port>/<tcp|udp|sctp>": {}}`.

User-defined key/value metadata.

An object mapping mount point paths inside the container to empty objects.

ContainerInspectResponse defines model for ContainerInspectResponse.

ContainerState stores container's running state.

String representation of the container state.

ContainerSummary defines model for ContainerSummary.

User-defined key/value metadata.

ContainerSummary_NetworkSettings_Networks defines model for ContainerSummary.NetworkSettings.Networks.

CreateImageJSONBody defines parameters for CreateImage.

CreateLayerParams defines parameters for CreateLayer.

CreatePodParams defines parameters for CreatePod.

DeleteNamespaceParams defines parameters for DeleteNamespace.

A device mapping between the host and container.

A request for devices to be sent to device drivers.

Driver-specific options, specified as a key/value pairs.

DockerBuildPruneParams defines parameters for DockerBuildPrune.

DockerConfigCreateJSONBody defines parameters for DockerConfigCreate.

DockerConfigListParams defines parameters for DockerConfigList.

DockerConfigUpdateJSONBody defines parameters for DockerConfigUpdate.

DockerConfigUpdateParams defines parameters for DockerConfigUpdate.

DockerContainerArchiveInfoParams defines parameters for DockerContainerArchiveInfo.

DockerContainerArchiveParams defines parameters for DockerContainerArchive.

DockerContainerAttachParams defines parameters for DockerContainerAttach.

DockerContainerAttachWebsocketParams defines parameters for DockerContainerAttachWebsocket.

DockerContainerCreateJSONBody defines parameters for DockerContainerCreate.

DockerContainerCreateParams defines parameters for DockerContainerCreate.

DockerContainerDeleteParams defines parameters for DockerContainerDelete.

DockerContainerInspectParams defines parameters for DockerContainerInspect.

DockerContainerKillParams defines parameters for DockerContainerKill.

DockerContainerListParams defines parameters for DockerContainerList.

DockerContainerLogsParams defines parameters for DockerContainerLogs.

DockerContainerPruneParams defines parameters for DockerContainerPrune.

DockerContainerRenameParams defines parameters for DockerContainerRename.

DockerContainerResizeParams defines parameters for DockerContainerResize.

DockerContainerRestartParams defines parameters for DockerContainerRestart.

DockerContainerStartParams defines parameters for DockerContainerStart.

DockerContainerStatsParams defines parameters for DockerContainerStats.

DockerContainerStopParams defines parameters for DockerContainerStop.

DockerContainerTopParams defines parameters for DockerContainerTop.

DockerContainerWaitParams defines parameters for DockerContainerWait.

DockerExecResizeParams defines parameters for DockerExecResize.

DockerGetPluginPrivilegesParams defines parameters for DockerGetPluginPrivileges.

DockerImageBuildParams defines parameters for DockerImageBuild.

DockerImageCommitParams defines parameters for DockerImageCommit.

DockerImageCreateParams defines parameters for DockerImageCreate.

DockerImageDeleteParams defines parameters for DockerImageDelete.

DockerImageGetAllParams defines parameters for DockerImageGetAll.

DockerImageListParams defines parameters for DockerImageList.

DockerImageLoadParams defines parameters for DockerImageLoad.

DockerImagePruneParams defines parameters for DockerImagePrune.

DockerImagePushParams defines parameters for DockerImagePush.

DockerImageSearchParams defines parameters for DockerImageSearch.

DockerImageTagParams defines parameters for DockerImageTag.

DockerNetworkInspectParams defines parameters for DockerNetworkInspect.

DockerNetworkListParams defines parameters for DockerNetworkList.

DockerNetworkPruneParams defines parameters for DockerNetworkPrune.

DockerNodeDeleteParams defines parameters for DockerNodeDelete.

DockerNodeListParams defines parameters for DockerNodeList.

DockerNodeUpdateParams defines parameters for DockerNodeUpdate.

DockerPluginCreateParams defines parameters for DockerPluginCreate.

DockerPluginDeleteParams defines parameters for DockerPluginDelete.

DockerPluginEnableParams defines parameters for DockerPluginEnable.

DockerPluginListParams defines parameters for DockerPluginList.

DockerPluginPullParams defines parameters for DockerPluginPull.

DockerPluginUpgradeParams defines parameters for DockerPluginUpgrade.

DockerPutContainerArchiveParams defines parameters for DockerPutContainerArchive.

DockerSecretCreateJSONBody defines parameters for DockerSecretCreate.

DockerSecretListParams defines parameters for DockerSecretList.

DockerSecretUpdateParams defines parameters for DockerSecretUpdate.

DockerServiceArchiveInfoParams defines parameters for DockerServiceArchiveInfo.

DockerServiceArchiveParams defines parameters for DockerServiceArchive.

DockerServiceCreateJSONBody defines parameters for DockerServiceCreate.

DockerServiceCreateParams defines parameters for DockerServiceCreate.

DockerServiceInspectParams defines parameters for DockerServiceInspect.

DockerServiceListParams defines parameters for DockerServiceList.

DockerServiceLogsParams defines parameters for DockerServiceLogs.

DockerServiceUpdateParams defines parameters for DockerServiceUpdate.

DockerSwarmLeaveParams defines parameters for DockerSwarmLeave.

DockerSwarmUpdateParams defines parameters for DockerSwarmUpdate.

DockerSystemEventsParams defines parameters for DockerSystemEvents.

DockerTaskListParams defines parameters for DockerTaskList.

DockerTaskLogsParams defines parameters for DockerTaskLogs.

DockerVolumeDeleteParams defines parameters for DockerVolumeDelete.

DockerVolumeListParams defines parameters for DockerVolumeList.

DockerVolumePruneParams defines parameters for DockerVolumePrune.

Driver represents a driver (network, logging, secrets).

Key/value map of driver-specific options.

EndpointIPAMConfig represents an endpoint's IPAM configuration.

EndpointPortConfig defines model for EndpointPortConfig.

EndpointPortConfigProtocol defines model for EndpointPortConfig.Protocol.

The mode in which port is published.

Configuration for a network endpoint.

DriverOpts is a mapping of driver options and values.

Properties that can be configured to access and load balance a service.

The mode of resolution to use for internal load balancing between tasks.

EngineDescription provides information about an engine.

EngineDescription_Labels defines model for EngineDescription.Labels.

Represents an error.

GenerateCertParams defines parameters for GenerateCert.

GetFeedAppTemplateParams defines parameters for GetFeedAppTemplate.

GetFeedAppVersionsParams defines parameters for GetFeedAppVersions.

GetPodLogParams defines parameters for GetPodLog.

Information about the storage driver used to store the container's and image's filesystem.

Low-level storage metadata, provided as key/value pairs.

Health stores information about the container's healthcheck results.

HealthcheckResult stores information about a single run of a healthcheck probe.

A test to perform to check that the container is healthy.

Status is one of `none`, `starting`, `healthy` or `unhealthy` - "none" Indicates there is no healthcheck - "starting" Starting indicates that the container is not yet ready - "healthy" Healthy indicates that the container is running correctly - "unhealthy" Unhealthy indicates that the container has a problem.

HostConfig defines model for HostConfig.

HostConfig_LogConfig_Config defines model for HostConfig.LogConfig.Config.

Storage driver options for this container, in the form `{"size": "120G"}`.

A list of kernel parameters (sysctls) to set in the container.

A map of container directories which should be replaced by tmpfs mounts, and their corresponding mount options.

cgroup namespace mode for the container.

Isolation technology of the container.

HostConfigLogConfigType defines model for HostConfig.LogConfig.Type.

Response to an API call that returns just an Id.

Information about an image in the local image cache.

ImageSummary defines model for ImageSummary.

ImageSummary_Labels defines model for ImageSummary.Labels.

Index defines model for Index.

IndexInfo contains information about a registry.

InspectKraudPodParams defines parameters for InspectKraudPod.

IoK8sAPICoreV1ObjectReference defines model for io.k8s.api.core.v1.ObjectReference.

APIGroup contains the name, the supported versions, and the preferred version of a group.

APIGroupList is a list of APIGroup, to allow clients to discover the API at /apis.

APIResource specifies the name of a resource and whether it is namespaced.

APIResourceList is a list of APIResource, it is used to expose the name of the resources supported in a specific group and version, and if the resource is namespaced.

APIVersions lists the versions that are available, to allow clients to discover the API at /api, which is the root path of the legacy v1 API.

GroupVersion contains the "group/version" and "version" string of a version.

ListMeta describes metadata that synthetic resources must have, including lists and various status objects.

ManagedFieldsEntry is a workflow-id, a FieldSet and the group version of the resource that the fieldset applies to.

ObjectMeta is metadata that all persisted resources must have, which includes all objects users must create.

Annotations is an unstructured key value map stored with a resource that may be set by external tools to store and retrieve arbitrary metadata.

Map of string keys and values that can be used to organize and categorize (scope and select) objects.

OwnerReference contains enough information to let you identify an owning object.

ServerAddressByClientCIDR helps the client to determine the server address that they should use, depending on the clientCIDR that they match.

IPAM defines model for IPAM.

Driver-specific options, specified as a map.

IPAMConfig defines model for IPAMConfig.

IPAMConfig_AuxiliaryAddresses defines model for IPAMConfig.AuxiliaryAddresses.

K8sCertificateSigningRequest defines model for k8s.CertificateSigningRequest.

K8sCertificateSigningRequestCondition defines model for k8s.CertificateSigningRequestCondition.

K8sCertificateSigningRequestList defines model for k8s.CertificateSigningRequestList.

K8sCertificateSigningRequestSpec defines model for k8s.CertificateSigningRequestSpec.

K8sCertificateSigningRequestStatus defines model for k8s.CertificateSigningRequestStatus.

K8sConfigMap defines model for k8s.ConfigMap.

K8sConfigMap_BinaryData defines model for K8sConfigMap.BinaryData.

K8sConfigMap_Data defines model for K8sConfigMap.Data.

K8sConfigMapList defines model for k8s.ConfigMapList.

A single application container that you want to run within a pod.

ContainerPort represents a network port in a single container.

ContainerState holds a possible state of container.

ContainerStateRunning is a running state of a container.

ContainerStateTerminated is a terminated state of a container.

ContainerStateWaiting is a waiting state of a container.

ContainerStatus contains details for the current status of this container.

K8sDeployment defines model for k8s.Deployment.

K8sDeploymentCondition defines model for k8s.DeploymentCondition.

K8sDeploymentList defines model for k8s.DeploymentList.

K8sDeploymentSpec defines model for k8s.DeploymentSpec.

ignored for compatbility.

K8sDeploymentStatus defines model for k8s.DeploymentStatus.

K8sDeploymentStrategy defines model for k8s.DeploymentStrategy.

K8sEndpointAddress defines model for k8s.EndpointAddress.

K8sEndpointPort defines model for k8s.EndpointPort.

K8sEndpoints defines model for k8s.Endpoints.

K8sEndpointsList defines model for k8s.EndpointsList.

K8sEndpointSubset defines model for k8s.EndpointSubset.

EnvVar represents an environment variable present in a Container.

K8sEvent defines model for k8s.Event.

K8sEventList defines model for k8s.EventList.

K8sIngress defines model for k8s.Ingress.

K8sIngressClass defines model for k8s.IngressClass.

K8sIngressClassList defines model for k8s.IngressClassList.

K8sIngressClassSpec defines model for k8s.IngressClassSpec.

K8sIngressList defines model for k8s.IngressList.

K8sIngressRule defines model for k8s.IngressRule.

K8sIngressRuleHTTP defines model for k8s.IngressRuleHttp.

K8sIngressRuleHTTPPath defines model for k8s.IngressRuleHttpPath.

K8sIngressRuleHTTPPathBackend defines model for k8s.IngressRuleHttpPathBackend.

K8sIngressRuleHTTPPathBackendService defines model for k8s.IngressRuleHttpPathBackendService.

K8sIngressRuleHTTPPathBackendServicePort defines model for k8s.IngressRuleHttpPathBackendServicePort.

K8sIngressSpec defines model for k8s.IngressSpec.

K8sIngressStatus defines model for k8s.IngressStatus.

K8sIngressTLS defines model for k8s.IngressTLS.

K8sLoadBalancerStatus defines model for k8s.LoadBalancerStatus.

K8sLoadBalancerStatusIngress defines model for k8s.LoadBalancerStatusIngress.

K8sLoadBalancerStatusIngressPort defines model for k8s.LoadBalancerStatusIngressPort.

Namespace.

NamespaceList is a list of Namespaces.

K8sNamespaceSpec defines model for k8s.NamespaceSpec.

K8sNamespaceStatus defines model for k8s.NamespaceStatus.

Node is emulated to make helm work.

K8sNodeAddress defines model for k8s.NodeAddress.

K8sNodeCondition defines model for k8s.NodeCondition.

NodeList is a list of Nodes.

K8sNodeResourceList defines model for k8s.NodeResourceList.

K8sNodeSpec defines model for k8s.NodeSpec.

K8sNodeStatus defines model for k8s.NodeStatus.

K8sNodeSystemInfo defines model for k8s.NodeSystemInfo.

K8sPersistentVolumeClaim defines model for k8s.PersistentVolumeClaim.

K8sPersistentVolumeClaimList defines model for k8s.PersistentVolumeClaimList.

K8sPersistentVolumeClaimSpec defines model for k8s.PersistentVolumeClaimSpec.

K8sPersistentVolumeClaimSpecResources defines model for k8s.PersistentVolumeClaimSpecResources.

PersistentVolumeClaimVolumeSource references the user's PVC in the same namespace.

Pod is a collection of containers that can run on a host.

PodCondition contains details for the current condition of this pod.

IP address information for entries in the (plural) PodIPs field.

PodList is a list of Pods.

PodSpec is a description of a pod.

PodStatus represents information about the status of a pod.

K8sResourceRequirements defines model for k8s.ResourceRequirements.

K8sResourceRequirements_Limits defines model for K8sResourceRequirements.Limits.

K8sResourceRequirements_Requests defines model for K8sResourceRequirements.Requests.

K8sRollingUpdateDeployment defines model for k8s.RollingUpdateDeployment.

K8sSecret defines model for k8s.Secret.

K8sSecret_BinaryData defines model for K8sSecret.BinaryData.

K8sSecret_Data defines model for K8sSecret.Data.

K8sSecretList defines model for k8s.SecretList.

K8sSelfSubjectAccessReview defines model for k8s.SelfSubjectAccessReview.

K8sSelfSubjectAccessReviewSpec defines model for k8s.SelfSubjectAccessReviewSpec.

K8sService defines model for k8s.Service.

K8sServiceAccount defines model for k8s.ServiceAccount.

K8sServiceAccountList defines model for k8s.ServiceAccountList.

K8sServiceList defines model for k8s.ServiceList.

K8sServicePort defines model for k8s.ServicePort.

K8sServiceSpec defines model for k8s.ServiceSpec.

K8sServiceSpec_Selector defines model for K8sServiceSpec.Selector.

K8sStorageClass defines model for k8s.StorageClass.

Parameters holds the parameters for the provisioner that should create volumes of this storage class.

StorageClassList is a collection of storage classes.

K8sSubjectAccessReviewStatus defines model for k8s.SubjectAccessReviewStatus.

K8sUser defines model for k8s.User.

K8sUserList defines model for k8s.UserList.

K8sUserSpec defines model for k8s.UserSpec.

Volume represents a named volume in a pod that may be accessed by any container in the pod.

volumeDevice describes a mapping of a raw block device within a container.

VolumeMount describes a mounting of a Volume within a container.

KraudAppOverview defines model for kraud.AppOverview.

app configuration variables.

KraudAppTemplateConfig defines model for kraud.AppTemplateConfig.

KraudAppTemplateConfigOption defines model for kraud.AppTemplateConfigOption.

KraudAppVersion defines model for kraud.AppVersion.

KraudCertificateGenerateResponse defines model for Kraud.CertificateGenerateResponse.

KraudContainer defines model for Kraud.Container.

KraudContainer_Env defines model for KraudContainer.Env.

KraudCreateFeed defines model for kraud.CreateFeed.

KraudCreateImageResponse defines model for Kraud.CreateImageResponse.

KraudDeployment defines model for Kraud.Deployment.

KraudDeploymentList defines model for Kraud.DeploymentList.

KraudDomain defines model for Kraud.Domain.

KraudDomainCreate defines model for Kraud.DomainCreate.

KraudDomainList defines model for Kraud.DomainList.

KraudEvent defines model for kraud.Event.

KraudFeed defines model for kraud.Feed.

KraudIdentityProvider defines model for kraud.IdentityProvider.

KraudIdentityProviderList defines model for kraud.IdentityProviderList.

Image is a docker image for a specific architecture.

Image is a named docker image.

KraudImageNameList defines model for Kraud.ImageNameList.

KraudInflow defines model for Kraud.Inflow.

KraudInflowList defines model for Kraud.InflowList.

KraudIngress defines model for Kraud.Ingress.

KraudIngressList defines model for Kraud.IngressList.

KraudLaunchAppResponse defines model for kraud.LaunchAppResponse.

LaunchSettings is the settings for launching an app.

KraudLaunchSettings_Config defines model for KraudLaunchSettings.Config.

Layer is a docker image layer.

KraudLayerList defines model for Kraud.LayerList.

KraudLayerReference defines model for Kraud.LayerReference.

KraudPod defines model for Kraud.Pod.

KraudPod_Res defines model for KraudPod.Res.

KraudPodList defines model for Kraud.PodList.

KraudPodOverlaySpec defines model for Kraud.PodOverlaySpec.

KraudPodStatus defines model for Kraud.PodStatus.

KraudSessionInfo defines model for kraud.SessionInfo.

KraudSessionTenantInfo defines model for kraud.SessionTenantInfo.

KraudSessionUserInfo defines model for kraud.SessionUserInfo.

KraudTenantInfo defines model for Kraud.TenantInfo.

KraudUserRole defines model for Kraud.UserRole.

KraudUserRoleList defines model for Kraud.UserRoleList.

KraudVolume defines model for Kraud.Volume.

KraudVolumeList defines model for Kraud.VolumeList.

KraudVolumeMount defines model for Kraud.VolumeMount.

KraudVpc defines model for Kraud.Vpc.

KraudVpcList defines model for Kraud.VpcList.

KraudVpcOverlay defines model for Kraud.VpcOverlay.

KraudVpcOverlayList defines model for Kraud.VpcOverlayList.

KraudVpcPod defines model for Kraud.VpcPod.

KraudVpcPodOverlayMember defines model for Kraud.VpcPodOverlayMember.

KraudVpcPublicNetwork defines model for Kraud.VpcPublicNetwork.

KraudVpcService defines model for Kraud.VpcService.

KraudVpcServicePort defines model for Kraud.VpcServicePort.

regular log lines.

metadata.

KrCradleState defines model for kr.CradleState.

KrDeployment defines model for kr.Deployment.

KrIngressDomain defines model for kr.IngressDomain.

KrIngressPort defines model for kr.IngressPort.

KrIngressRoute defines model for kr.IngressRoute.

KrNamespaceOverview defines model for kr.NamespaceOverview.

KrNamespaceOverview_Annotations defines model for KrNamespaceOverview.Annotations.

KrNamespaceOverview_Labels defines model for KrNamespaceOverview.Labels.

KrNamespaceReference defines model for kr.NamespaceReference.

KrTenant defines model for kr.Tenant.

KrTenantList defines model for kr.TenantList.

KrVmmContainerReport defines model for kr.VmmContainerReport.

KrVmmPodReport defines model for kr.VmmPodReport.

KrVolume defines model for kr.Volume.

LaunchTemplateParams defines parameters for LaunchTemplate.

An object describing a limit on resources which can be requested by a task.

ListCertificateSigningRequestsParams defines parameters for ListCertificateSigningRequests.

ListConfigMapsParams defines parameters for ListConfigMaps.

ListDeploymentsParams defines parameters for ListDeployments.

ListEndpointsAllNamespacesParams defines parameters for ListEndpointsAllNamespaces.

ListEndpointsParams defines parameters for ListEndpoints.

ListIngressClassesParams defines parameters for ListIngressClasses.

ListIngressesParams defines parameters for ListIngresses.

ListKraudPodsParams defines parameters for ListKraudPods.

ListNamespacesEventsParams defines parameters for ListNamespacesEvents.

ListNamespacesParams defines parameters for ListNamespaces.

ListNodesParams defines parameters for ListNodes.

ListPersistentVolumeClaimsParams defines parameters for ListPersistentVolumeClaims.

ListPodsAllNamespacesParams defines parameters for ListPodsAllNamespaces.

ListPodsParams defines parameters for ListPods.

ListSecretsParams defines parameters for ListSecrets.

ListServiceAccountsParams defines parameters for ListServiceAccounts.

ListServicesAllNamespacesParams defines parameters for ListServicesAllNamespaces.

ListServicesParams defines parameters for ListServices.

ListStorageClassesParams defines parameters for ListStorageClasses.

ListUsersParams defines parameters for ListUsers.

Current local status of this node.

ManagerStatus represents the status of a manager.

Mount defines model for Mount.

key/value map of driver specific options.

User-defined key/value metadata.

A propagation mode with the value `[r]private`, `[r]shared`, or `[r]slave`.

MountPoint represents a mount point configuration inside the container.

The mount type: - `bind` a mount of a file or directory from the host into the container.

The mount type.

Network defines model for Network.

Network_Containers defines model for Network.Containers.

Network_Labels defines model for Network.Labels.

Network_Options defines model for Network.Options.

Specifies how a service should be attached to a particular network.

Driver attachment options for the network target.

NetworkContainer defines model for NetworkContainer.

NetworkingConfig represents the container's networking configuration for each of its interfaces.

A mapping of network name to endpoint configuration for that network.

NetworkSettings exposes the network settings in the API.

Information about all networks that the container is connected to.

Node defines model for Node.

NodeDescription encapsulates the properties of the Node as reported by the agent.

NodeSpec defines model for NodeSpec.

User-defined key/value metadata.

Availability of the node.

Role of the node.

NodeState represents the state of a node.

NodeStatus represents the status of a node.

The version number of the object such as node, service, etc.

Represents a peer-node in the swarm.

Platform represents the platform (Arch/OS).

Describes a permission the user has to accept upon installing the plugin.

Available plugins per type.

An open port on a container.

PortBinding represents a binding between a host IP address and a host port.

PortMap describes the mapping of container ports to host ports, using the container's port-number and protocol as key in the format `<port>/<protocol>`, for example, `80/udp`.

PortType defines model for Port.Type.

Reachability represents the reachability of a node.

RegistryServiceConfig stores daemon registry services configuration.

RegistryServiceConfig_IndexConfigs defines model for RegistryServiceConfig.IndexConfigs.

An object describing the resources which can be advertised by a node and requested by a task.

A container's resources (cgroups config, ulimits, etc).

Response is a common response struct for all the API calls.

The behavior to apply when the container exits.

- Empty string means not to restart - `no` Do not automatically restart - `always` Always restart - `unless-stopped` Restart always except when the user has manually stopped the container - `on-failure` Restart only when the container exit code is non-zero.

Runtime describes an [OCI compliant](https://github.com/opencontainers/runtime-spec) runtime.

Secret defines model for Secret.

SecretSpec defines model for SecretSpec.

User-defined key/value metadata.

SendTelCodeJSONBody defines parameters for SendTelCode.

Service defines model for Service.

ServiceEndpoint defines model for ServiceEndpoint.

The status of the service when it is in one of ReplicatedJob or GlobalJob modes.

User modifiable configuration for a service.

User-defined key/value metadata.

Scheduling mode for the service.

ServiceSpecModeReplicated defines model for ServiceSpecModeReplicated.

Action to take if an rolled back task fails to run, or stops running during the rollback.

The order of operations when rolling back a task.

Action to take if an updated task fails to run, or stops running during the update.

The order of operations when rolling out an updated task.

The status of the service's tasks.

The status of a service update.

ServiceUpdateStatusState defines model for ServiceUpdateStatus.State.

Represents generic information about swarm.

User modifiable swarm configuration.

An object with key/value pairs that are interpreted as protocol-specific options for the external CA driver.

User-defined key/value metadata.

Driver-specific options for the selectd log driver, specified as key/value pairs.

Protocol for communication with the external CA (currently only `cfssl` is supported).

SystemInfo defines model for SystemInfo.

List of [OCI compliant](https://github.com/opencontainers/runtime-spec) runtimes configured on the daemon.

The driver to use for managing cgroups.

The version of the cgroup.

Represents the isolation technology to use as a default for containers.

Response of Engine API: GET "/version".

User modifiable task configuration.

TaskSpec_LogDriver_Options defines model for TaskSpec.LogDriver.Options.

Container spec for the service.

User-defined key/value data.

Set kernel namedspaced parameters (sysctls) in the container.

TaskSpecContainerSpecConfig defines model for TaskSpecContainerSpecConfig.

Isolation technology of the containers running the service.

TaskSpecContainerSpecSecret defines model for TaskSpecContainerSpecSecret.

Condition for restart.

ThrottleDevice defines model for ThrottleDevice.

Information about the issuer of leaf TLS certificates and the trusted root CA certificate.

UpdateUserRolesJSONBody defines parameters for UpdateUserRoles.

Volume defines model for Volume.

User-defined key/value metadata.

The driver specific options used when creating the volume.

Low-level details about the volume, provided by the volume driver.

Volume configuration.

A mapping of driver options and values.

User-defined key/value metadata.

The level at which the volume exists.

CreateDomainJSONBody defines parameters for CreateDomain.

CreateDomainJSONRequestBody defines body for CreateDomain for application/json ContentType.

CreateFeedJSONBody defines parameters for CreateFeed.

CreateFeedJSONRequestBody defines body for CreateFeed for application/json ContentType.

CreateImageJSONRequestBody defines body for CreateImage for application/json ContentType.

CreateTenantJSONBody defines parameters for CreateTenant.

CreateTenantJSONRequestBody defines body for CreateTenant for application/json ContentType.

CreateUserJSONBody defines parameters for CreateUser.

CreateUserJSONRequestBody defines body for CreateUser for application/json ContentType.

DockerConfigCreateJSONRequestBody defines body for DockerConfigCreate for application/json ContentType.

DockerConfigUpdateJSONRequestBody defines body for DockerConfigUpdate for application/json ContentType.

DockerContainerCreateJSONRequestBody defines body for DockerContainerCreate for application/json ContentType.

DockerSecretCreateJSONRequestBody defines body for DockerSecretCreate for application/json ContentType.

DockerServiceCreateJSONRequestBody defines body for DockerServiceCreate for application/json ContentType.

DockerVolumeCreateJSONBody defines parameters for DockerVolumeCreate.

DockerVolumeCreateJSONRequestBody defines body for DockerVolumeCreate for application/json ContentType.

EditKraudPodJSONBody defines parameters for EditKraudPod.

EditKraudPodJSONRequestBody defines body for EditKraudPod for application/json ContentType.

EditKraudVolumeJSONBody defines parameters for EditKraudVolume.

EditKraudVolumeJSONRequestBody defines body for EditKraudVolume for application/json ContentType.

User-defined resources can be either Integer resources (e.g, `SSD=3`) or String resources (e.g, `GPU=UUID1`).

IdpCreateJSONBody defines parameters for IdpCreate.

IdpCreateJSONRequestBody defines body for IdpCreate for application/json ContentType.

FieldsV1 stores a set of fields in a data structure like a Trie, in JSON format.

Time is a wrapper around time.Time which supports correct marshaling to YAML and JSON.

IntOrString is a type that can hold an int32 or a string.

K8sNodeStatusImage defines model for k8s.NodeStatusImage.

KraudAppVersionList defines model for kraud.AppVersionList.

KraudFeedList defines model for kraud.FeedList.

LaunchAppJSONBody defines parameters for LaunchApp.

LaunchAppJSONRequestBody defines body for LaunchApp for application/json ContentType.

SendTelCodeJSONRequestBody defines body for SendTelCode for application/json ContentType.

UpdateBillingInfoJSONBody defines parameters for UpdateBillingInfo.

UpdateBillingInfoJSONRequestBody defines body for UpdateBillingInfo for application/json ContentType.

UpdateUserRolesJSONRequestBody defines body for UpdateUserRoles for application/json ContentType.

VmmReportContainerStateJSONBody defines parameters for VmmReportContainerState.

VmmReportContainerStateJSONRequestBody defines body for VmmReportContainerState for application/json ContentType.

VmmReportPodStateJSONBody defines parameters for VmmReportPodState.

VmmReportPodStateJSONRequestBody defines body for VmmReportPodState for application/json ContentType.