MIDI Converser

Converter and player for MIDI files to play hymns in church on electronic organs.

Runs on Linux with ALSA and an USB MIDI device (or, for local testing, with FluidSynth).

Installation

sudo apt install golang                # For running the MIDI generator.
sudo apt install alsa-utils figlet yq  # For using the text based player.
sudo apt install fluidsynth            # For playing with local speakers.
./build.sh

Usage

Generate Files For a Hymn

If not done yet, write a YAML file midiconverser.yml like the following (written for the LD-34 organ):
```
channel: 2
melody_channel: 1
melody_track_name_re: ^(Melody|Soprano|Voice|Voice 1)$
bass_channel: 3
bass_track_name_re: ^(Bass|Baritone)$
fermatas_in_prelude: true
fermatas_in_postlude: true
```
with the following keys:
- melody_track_name_re: partial-match regular expression that melody track names should match (default: unset).
- bass_track_name_re: partial-match regular expression that bass track names should match (default: unset).
- solo_track_name_re: partial-match regular expression that solo track names should match (default: unset). If a track is marked as solo, then it is removed from the channel output if it matches the conditions for melody or bass.
- channel: MIDI channel (1-16) to map all notes to, or 0 to not remap (default). When using an organ, map this to the great manual.
- melody_channel: additional channel for melody notes (default: unset). When using an organ, map this to the swell manual. This is basically the "melody coupler" feature some organs have.
- bass_channel: additional channel for bass notes (default: unset). When using an organ, map this to the pedal. This is basically the "bass coupler" feature some organs have.
- hold_redundant_notes: true to keep redundant notes playing, false to restart them (default).
- bpm_factor: tempo factor as desired (default: 1.0).
- prelude_player_repeat: number of times each hymn will be repeated in the prelude player (default: 2).
- prelude_player_sleep_sec: number of seconds between hymns in the prelude player (default: 2).
- fermatas_in_prelude: interpret fermata instructions when generating the prelude (default: false).
- fermatas_in_postlude: interpret fermata instructions when generating the postlude (default: false).
- fermata_extend_beats: number of extra beats to hold fermata notes (default: 1). Affects only the pre-arranged MIDI outputs.
- fermata_rest_beats: number of rest beats after a fermata (default: 1). Affects only the pre-arranged MIDI outputs.
- rest_between_verses_beats: number of beats to wait between verses (default: 1). Affects only the pre-arranged MIDI outputs.
- whole_export_sleep_sec: number of seconds at the end of a "whole" exported MIDI (default: 0).
Write a YAML file like the following:
```
input_file: ../hymns/27.mid
fermatas:
  - "22.2+1/4"
prelude:
  - begin: "1.1"
    end: "5.1"
  - begin: "29.1"
    end: "33.1"
num_verses: 4
qpm_override: 86
```
with the following keys:
- input_file: MIDI file to read.
- input_file_sha256: SHA-256 checksum of the input MIDI file content (optional; can be auto filled in when passing -add_checksum).
- fermatas: list of positions of fermatas (default: empty); this should point inside the note to hold (ideally halfway).
- prelude: list of begin/end positions for the prelude (default: empty); the end positions are exclusive and thus should be the beat where the next non-prelude portion begins. The last item can point behind the last bar.
- verse: list of begin/end positions for the verse (default: full file); the end positions are exclusive and thus should be the beat where the next non-prelude portion begins. The last item can point behind the last bar. Rarely ever needed.
- postlude: list of begin/end positions for the postlude (default: empty); the end positions are exclusive and thus should be the beat where the next non-prelude portion begins. The last item can point behind the last bar. Rarely ever needed.
- num_verses: number of verses of this hymn (default: 1).
- qpm_override: replacement value for tempo in quarter notes per minute, if nonzero (default: 0).
- bpm_factor: tempo factor to adjust the input (default: 1.0). Only really makes sense to use when not using qpm_override.
- max_adjust: maximum number of MIDI ticks to adjust positions by (default: 64).
- keep_event_order: try to retain event order within a tick (default: false).
- melody_tracks: list of track indexes (zero-based) to map to melody, overriding global settings (default: unset).
- bass_tracks: list of track indexes (zero-based) to map to bass, overriding global settings (default: unset).
- solo_tracks: list of track indexes (zero-based) to not map the general channel when they have already been mapped to melody or bass (default: unset).
- fermatas_in_prelude: interpret fermata instructions when generating the prelude (default: same as config).
- fermatas_in_postlude: interpret fermata instructions when generating the postlude (default: same as config).
- tags: a list of tags to select in the prelude player.
- _comment: A text string that will be left alone by rewriting.
whereas a "position" is a quoted string of the form:
- bar.beat to specify an exact beat
- bar.beat+num/denom to specify a position between two beats; the fraction is the fraction of the next beat to use
To generate MIDI files, ru :
```
./process -i hymnnumber.yml
```

Prepare for Playing

Connect a MIDI device via USB, or launch FluidSynth as follows:

fluidsynth -f fluidsynth.conf

A sample fluidsynth.conf to sort of emulate the LD-34 organ:

# Swell: loud reed organ.
prog 0 20
cc 0 7 100
# Great: medium church organ.
prog 1 19
cc 1 7 90
# Pedal: soft drawbar organ.
prog 2 16
cc 2 7 80

Test that the desired output device exists:
```
aplaymidi -l
```

Graphical UI Manual

Just run ./ebitenui_player. It should be rather self explanatory.

As a bonus, this UI can be compiled to run in web browsers, and even installed on an Android phone or tablet as a PWA via the web browser's "Add to Home Screen" feature. See ./build.sh for how the build process for the web based version works.

Text UI Manual

Play a Hymn (Text UI)

./textui_player and hit Return.
Type: :play followed by the name of the YAML file.
When prompted, hit any key to proceed with the hymn. It waits twice at a fermata (once to stop the note, and a second time to resume the hymn), and once before each verse. Watch the conductor at these points.
If needed, press Backspace or Ctrl-C to exit (preferably during a break). Otherwise it will finish at the configured number of verses.

Play arbitrary hymns in random order (for prelude before the meeting).

./textui_player and hit Return.
Type: :prelude and hit Return.
Press Ctrl-C to exit (preferably during a break).

Player Commands

The player supports the following keyboard commands:

+, = or .: speed up.
-, _ or ,: slow down.
Ctrl-C: exit right away.
Backspace: stop playing.
Type :prelude and hit Return: enter prelude player (randomly play hymns).
Type :play , then type a file name and hit Return: interactively play the given hymn.
Type :tempo , then type a fractional number and hit Return: set tempo modifier to that value (value 1 selects original tempo).
Type :verses , then type an integer and hit Return: change the number of verses for the currently playback.
Type :q and hit Return: exit right away.
Escape: leave the : prompt, or clear error status.
Space (or any other unmapped key): proceed playing when paused.

Where to Get Hymns

To be described later.

License

This software is released under the GPL 3.0.

# Packages

# README