AddToScheme adds the types in this group-version to the given scheme.

GroupVersion is the API Group Version used to register the objects.

SchemeBuilder is used to add go types to the GroupVersionKind scheme.

The name of a field in the request payload that contains part or all of your customer's primary physical address.

Specifies that WAF should allow the request and optionally defines additional custom handling for the request.

Information for a single API key.

Specifies custom configurations for the associations between the web ACL and protected resources.

Details for your use of the account creation fraud prevention managed rule group, AWSManagedRulesACFPRuleSet.

Details for your use of the account takeover prevention managed rule group, AWSManagedRulesATPRuleSet.

Details for your use of the Bot Control managed rule group, AWSManagedRulesBotControlRuleSet.

Specifies that WAF should block the request and optionally defines additional custom handling for the response to the web request.

Inspect the body of the web request.

A rule statement that defines a string match search for WAF to apply to web requests.

Specifies that WAF should run a CAPTCHA check against the request: - If the request includes a valid, unexpired CAPTCHA token, WAF applies any custom request handling and labels that you've configured and then allows the web request inspection to proceed to the next rule, similar to a CountAction.

Specifies how WAF should handle CAPTCHA evaluations.

Specifies that WAF should run a Challenge check against the request to verify that the request is coming from a legitimate client session: - If the request includes a valid, unexpired challenge token, WAF applies any custom request handling and labels that you've configured and then allows the web request inspection to proceed to the next rule, similar to a CountAction.

Specifies how WAF should handle Challenge evaluations.

The filter to use to identify the subset of cookies to inspect in a web request.

Inspect the cookies in the web request.

Specifies that WAF should count the request.

A custom header for custom request and response handling.

Custom request handling behavior that inserts custom headers into a web request.

A custom response to send to the client.

The response body to use in a custom response to a web request.

In a WebACL, this is the action that you want WAF to perform when a web request doesn't match any of the rules in the WebACL.

The name of the field in the request payload that contains your customer's email.

Specifies a single rule in a rule group whose action you want to override to Count.

Specifies a web request component to be used in a rule match statement or in a logging configuration.

A rule group that's defined for an Firewall Manager WAF policy.

The processing guidance for an Firewall Manager rule.

The configuration for inspecting IP addresses in an HTTP header that you specify, instead of using the IP address that's reported by the web request origin.

A rule statement that labels web requests by country and region and that matches against web requests based on country code.

The filter to use to identify the subset of headers to inspect in a web request.

Inspect a string containing the list of the request's header names, ordered as they appear in the web request that WAF receives for inspection.

Inspect all headers in the web request.

Used for CAPTCHA and challenge token settings.

IPSet is the Schema for the IPSets API +kubebuilder:object:root=true +kubebuilder:subresource:status.

Contains zero or more IP addresses or blocks of IP addresses specified in Classless Inter-Domain Routing (CIDR) notation.

The configuration for inspecting IP addresses in an HTTP header that you specify, instead of using the IP address that's reported by the web request origin.

IPSetList contains a list of IPSet +kubebuilder:object:root=true.

A rule statement used to detect web requests coming from particular IP addresses or address ranges.

IPSetSpec defines the desired state of IPSet.

IPSetStatus defines the observed state of IPSet.

High-level information about an IPSet, returned by operations like create and list.

Match against the request's JA3 fingerprint.

Inspect the body of the web request as JSON.

The patterns to look for in the JSON body.

A single label container.

A rule statement to match against labels that have been added to the web request by rules that have already run in the web ACL.

A single label name condition for a Condition in a logging filter.

List of labels used by one or more of the rules of a RuleGroup.

Defines an association between logging destinations and a web ACL resource, for logging from WAF.

The properties of a managed product, such as an Amazon Web Services Managed Rules rule group or an Amazon Web Services Marketplace managed rule group.

Additional information that's used by a managed rule group.

A rule statement used to run the rules that are defined in a managed rule group.

High-level information about a managed rule group, returned by ListAvailableManagedRuleGroups.

Describes a single version of a managed rule group.

A set of rules that is managed by Amazon Web Services and Amazon Web Services Marketplace sellers to provide versioned managed rule groups for customers of WAF.

High-level information for a managed rule set.

Information for a single version of a managed rule set.

Information for a release of the mobile SDK, including release notes and tags.

A logical rule statement used to negate the results of another rule statement.

The action to use in the place of the action that results from the rule group evaluation.

The name of the field in the request payload that contains your customer's password.

The name of a field in the request payload that contains part or all of your customer's primary phone number.

A rate-based rule counts incoming requests and rate limits requests when they are coming at too fast a rate.

Specifies a single custom aggregate key for a rate-base rule.

The set of IP addresses that are currently blocked for a RateBasedStatement.

Specifies a cookie as an aggregate key for a rate-based rule.

Specifies a header as an aggregate key for a rate-based rule.

Specifies a label namespace to use as an aggregate key for a rate-based rule.

Specifies a query argument in the request as an aggregate key for a rate-based rule.

Specifies the request's query string as an aggregate key for a rate-based rule.

Specifies the request's URI path as an aggregate key for a rate-based rule.

A single regular expression.

A rule statement used to search web request components for a match against a single regular expression.

Contains one or more regular expressions.

A rule statement used to search web request components for matches with regular expressions.

High-level information about a RegexPatternSet, returned by operations like create and list.

High level information for an SDK release.

Customizes the maximum size of the request body that your protected CloudFront, API Gateway, Amazon Cognito, App Runner, and Verified Access resources forward to WAF for inspection.

The criteria for inspecting login requests, used by the ATP rule group to validate credentials usage.

The criteria for inspecting account creation requests, used by the ACFP rule group to validate and track account creation attempts.

The criteria for inspecting responses to login requests and account creation requests, used by the ATP and ACFP rule groups to track login and account creation success and failure rates.

Configures inspection of the response body.

Configures inspection of the response header.

Configures inspection of the response JSON.

Configures inspection of the response status code.

A single rule, which you can use in a WebACL or RuleGroup to identify web requests that you want to manage in some way.

The action that WAF should take on a web request when it matches a rule's statement.

Action setting to use in the place of a rule action that is configured inside the rule group.

RuleGroup is the Schema for the RuleGroups API +kubebuilder:object:root=true +kubebuilder:subresource:status.

A rule group defines a collection of rules to inspect and control web requests that you can use in a WebACL.

RuleGroupList contains a list of RuleGroup +kubebuilder:object:root=true.

A rule statement used to run the rules that are defined in a RuleGroup.

RuleGroupSpec defines the desired state of RuleGroup.

RuleGroupStatus defines the observed state of RuleGroup.

High-level information about a RuleGroup, returned by operations like create and list.

High-level information about a Rule, returned by operations like DescribeManagedRuleGroup.

Represents a single sampled web request.

Inspect one of the headers in the web request, identified by name, for example, User-Agent or Referer.

Inspect one query argument in the web request, identified by name, for example UserName or SalesRegion.

A rule statement that compares a number of bytes against the size of a request component, using a comparison operator, such as greater than (>) or less than (<).

A rule statement that inspects for malicious SQL code.

The processing guidance for a Rule, used by WAF to determine whether a web request matches the rule.

A tag associated with an Amazon Web Services resource.

The collection of tagging definitions for an Amazon Web Services resource.

Text transformations eliminate some of the unusual formatting that attackers use in web requests in an effort to bypass detection.

The name of the field in the request payload that contains your customer's username.

A version of the named managed rule group, that the rule group's vendor publishes for use by customers.

Defines and enables Amazon CloudWatch metrics and web request sample collection.

WebACL is the Schema for the WebACLS API +kubebuilder:object:root=true +kubebuilder:subresource:status.

A web ACL defines a collection of rules to use to inspect and control web requests.

WebACLList contains a list of WebACL +kubebuilder:object:root=true.

WebACLSpec defines the desired state of WebACL.

WebACLStatus defines the observed state of WebACL.

High-level information about a WebACL, returned by operations like create and list.

A rule statement that inspects for cross-site scripting (XSS) attacks.