dht-tester

This is a small program used for running and testing the Provide/FindProviders functionality of go-libp2p-kad-dht.

Requirements

• go 1.19

Usage

To build (do these in ${GOPATH}/github.com/):

git clone https://github.com/ChainSafe/dht-tester.git
git clone https://github.com/ChainSafe/go-libp2p-kad-dht.git
git clone https://github.com/ChainSafe/go-datastore.git
cd go-libp2p-kad-dht && git checkout noot/demo-logs && cd ..
git clone https://github.com/ChainSafe/go-libp2p-kbucket.git
cd dht-tester
go build

This places the tester, client, and testclient binaries in bin/.

Tester

By default, tester runs an RPC server that exposes two RPC endpoints, dht_provide and dht_lookup. You can call these functions with the cli program to provide and look up CIDs.

tester also has an --auto mode where it will automatically provide and look up test CIDs. Note: in --auto mode, the RPC server still runs and accepts requests.

To run the tester with <count> nodes:

./bin/tester --count <count>

To run the tester in --auto mode:

./bin/tester --count <count> --auto

The tester has other options for duration and prefix-length (for double-hashing DHT prefix lookups):

$ ./bin/tester --help
NAME:
   dht-tester - test libp2p nodes running go-libp2p-kad-dht

USAGE:
   dht-tester [global options] command [command options] [arguments...]

COMMANDS:
   help, h  Shows a list of commands or help for one command

GLOBAL OPTIONS:
   --count value          number of nodes to run (default: 10)
   --duration value       length of time to run simulation in seconds (default: 60)
   --auto                 automatically provide and look up test CIDs (default: false)
   --prefix-length value  set prefix length for lookups; set to 0 to look up full double-hash (default: 0)
   --num-test-cids value  number of test CIDs to generate (default: 20)
   --log value            log level: one of [error|warn|info|debug] (default: "info")
   --help, -h             show help (default: false)

Tip: to print out generated test CIDs, turn on --log=debug.

CLI

Once the tester is running, you can provide CIDs as follows:

./bin/client provide --cids bafkreihmx6mmapzpf3hqa63nsyu3kdyzymacw4ergtpro6xi5zetcc4k34,bafkreibxoxofljarx4aim62ku6rs4izji5g7r62yzfwcyptbr4hb36hnrm --host-index=<host-index>

You should see logs in tester saying the CID was provided.

The provide subcommand --cids flag takes a comma-separated list of CIDs to provide. The --host-index is the index of the node running in tester that should provide these CIDs (default=0). The --host-index must be less than <count>.

To look up providers for a CID:

./bin/client lookup --cid bafkreihmx6mmapzpf3hqa63nsyu3kdyzymacw4ergtpro6xi5zetcc4k34 --host-index=<host-index>
# found 2 providers for cid bafkreihmx6mmapzpf3hqa63nsyu3kdyzymacw4ergtpro6xi5zetcc4k34
#	provider 0: {12D3KooWKwiBxSXpjPEy8XNsP12fG5p2rj4sVBiJU6KMXt1XgrRV: [/ip4/192.168.0.102/tcp/6002 /ip4/127.0.0.1/tcp/6002]}
#	provider 1: {12D3KooWCxi2eugv2XHNeoeFyenfZ6F9UXLgZZZUFxy9iMBwgNVi: [/ip4/192.168.0.102/tcp/6000 /ip4/127.0.0.1/tcp/6000]}

testclient

Testclient is an extension to the CLI that automatically provides a specified number of CIDs in round-robin fashion (ie. if there are 100 nodes and 1000 CIDs, each node will provide 10 CIDs). It also then does a lookup on every node and ensures that each node can find the correct providers for the CID.

First, run the tester with some number of nodes:

./bin/tester --count=50 --duration=6000 --num-test-cids=0 

Then, run testclient:

./testclient --num-test-cids=100

If all is successful, the programs exits quietly. Otherwise, it panics at the lookup that was missing providers.